Tony i am now back from St Louis so can check my old emails
looks like you shipped it around may 7 Dave --- In [email protected], "Tony Parks" <[EMAIL PROTECTED]> wrote: > > Hi Dave, > > Please let me know the date you received your v8.3 kit. I am trying to determine if PIC's programmed with my new programmer contained the wrong EE data. > > Thanks and 73, > Tony KB9YIG > ----- Original Message ----- > From: David Robinson > To: [email protected] > Sent: Sunday, June 01, 2008 9:04 PM > Subject: [softrock40] Re: Tom´s Software version 2.4 > > > I had the same experience as KB2XJ with a mid may 8.3 kit. I > verified the pic against the hex dump in the files area and found > the program code matched but not the freq code. so i erased the pic, > loaded it with the correct hex image and it has worked fine ever > since > > Dave > > ww2r > > > > > > The 12F683 was the problem with mine, wrong freq's. Erased and re- > > loaded the chip - problem solved - worked perfectly then. > > > > Jim - KB2XJ > > > > --- In [email protected], "James R. Elledge" <kb2xj@> > wrote: > > > > --- In [email protected], "Terry" <wb4jfi@> wrote: > > > > > > --- In [email protected], "Jose Bonanca" <jbct1aos@> > > > wrote: > > > > > > > > Been testing this SW with a XTALL 1.1 and Xtall version 1. > > > > In both version the SW works but very far away from the center > > > frequencies. > > > > sometimes more than 1MHZ away. > > > > The PIC´s I got (3) have been programmed by Tony and he says > >no oneelse isreporting the trouble. > > > > > > Am I alone in this thread ?? > > > > > > Thanks to all. > > > 73 > > > > > > -- > > > Jose Bonanca (CT1aos) > > > >
