there were many deviations, it was not a contant. 5 of the settings gave the same frequency around 53MHz
I still have a copy of the hex image which i received Dave --- In [email protected], "Jose Bonanca" <[EMAIL PROTECTED]> wrote: > > Dave it means that you may had the same problem as me. > Did you measured the deviation ? > when did you receive your kit ? Was it after May 26? > > Thanks > > 73 > > On Mon, Jun 2, 2008 at 2:04 AM, David Robinson <[EMAIL PROTECTED]> wrote: > > > I had the same experience as KB2XJ with a mid may 8.3 kit. I > > verified the pic against the hex dump in the files area and found > > the program code matched but not the freq code. so i erased the pic, > > loaded it with the correct hex image and it has worked fine ever > > since > > > > Dave > > > > ww2r > > > > > > > > > The 12F683 was the problem with mine, wrong freq's. Erased and re- > > > loaded the chip - problem solved - worked perfectly then. > > > > > > Jim - KB2XJ > > > > > > > --- In [email protected] <softrock40% 40yahoogroups.com>, "James > > R. Elledge" <kb2xj@> > > wrote: > > > > > > --- In [email protected] <softrock40% 40yahoogroups.com>, > > "Terry" <wb4jfi@> wrote: > > > > > > > > --- In [email protected] <softrock40% 40yahoogroups.com>, > > "Jose Bonanca" <jbct1aos@> > > > > wrote: > > > > > > > > > > Been testing this SW with a XTALL 1.1 and Xtall version 1. > > > > > In both version the SW works but very far away from the center > > > > frequencies. > > > > > sometimes more than 1MHZ away. > > > > > The PIC´s I got (3) have been programmed by Tony and he says > > >no oneelse isreporting the trouble. > > > > > > > > Am I alone in this thread ?? > > > > > > > > Thanks to all. > > > > 73 > > > > > > > > -- > > > > Jose Bonanca (CT1aos) > > > > > > > > > > > > > > -- > Jose Bonanca (CT1aos) >
