Hi Dave, Please let me know the date you received your v8.3 kit. I am trying to determine if PIC's programmed with my new programmer contained the wrong EE data.
Thanks and 73, Tony KB9YIG ----- Original Message ----- From: David Robinson To: [email protected] Sent: Sunday, June 01, 2008 9:04 PM Subject: [softrock40] Re: Tom´s Software version 2.4 I had the same experience as KB2XJ with a mid may 8.3 kit. I verified the pic against the hex dump in the files area and found the program code matched but not the freq code. so i erased the pic, loaded it with the correct hex image and it has worked fine ever since Dave ww2r > > > The 12F683 was the problem with mine, wrong freq's. Erased and re- > loaded the chip - problem solved - worked perfectly then. > > Jim - KB2XJ > --- In [email protected], "James R. Elledge" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "Terry" <wb4jfi@> wrote: > > > > --- In [email protected], "Jose Bonanca" <jbct1aos@> > > wrote: > > > > > > Been testing this SW with a XTALL 1.1 and Xtall version 1. > > > In both version the SW works but very far away from the center > > frequencies. > > > sometimes more than 1MHZ away. > > > The PIC´s I got (3) have been programmed by Tony and he says >no oneelse isreporting the trouble. > > > > Am I alone in this thread ?? > > > > Thanks to all. > > 73 > > > > -- > > Jose Bonanca (CT1aos) > >
