Hi Yiu, all, If there is a real issue with defining two DHCPv6 options (which I don't see), an alternative would be to define one option with a sub-code field. This field indicates whether the option carries an IP address or a name option.
Cheers, Med ________________________________ De : softwires-boun...@ietf.org [mailto:softwires-boun...@ietf.org] De la part de Yiu L. Lee Envoyé : vendredi 8 octobre 2010 16:55 À : Tomasz Mrugalski; Softwires WG Cc : draft-ietf-softwire-ds-lite-tunnel-opt...@tools.ietf.org; Softwire Chairs; Ullio Mario Objet : Re: [Softwires] DHCPv6 AFTR name option is needed How about define a new option just for FQDN? Will this address the IESG's concern? On 10/7/10 11:24 PM, "Tomasz Mrugalski" <tomasz.mrugal...@gmail.com> wrote: Roberta, Mohamed, AFTR name option was removed as a result of a concerns raised by Jari Arkko and Ralph Droms during IESG review. They were very clear that defining two options to configure the same parameter is not acceptable. Regarding scenario mentioned by Mohamed, since you are already differentiating between different locations (as I understand in your scenario different locations provide different DNS addresses that resolve the same AFTR FQDN to different addresses, right?), you may do this explicitly and provide different AFTR addresses. Would that solve the problem? Hope that helps. Tomek On Thu, Oct 7, 2010 at 11:58 AM, Maglione Roberta <roberta.magli...@telecomitalia.it> wrote: Hello All, I fully agree with Med, both AFTR IP address and AFTR name options are needed, in order to be able to handle different scenarios. We really would like to see both of them back in the draft. Best regards, Roberta -----Original Message----- From: softwires-boun...@ietf.org [mailto:softwires-boun...@ietf.org] On Behalf Of mohamed.boucad...@orange-ftgroup.com Sent: giovedì 7 ottobre 2010 10.07 To: draft-ietf-softwire-ds-lite-tunnel-opt...@tools.ietf.org; Softwire Chairs Cc: softwires@ietf.org Subject: [Softwires] DHCPv6 AFTR name option is needed Dear authors, chairs, We are surprised to see the AFTR name option being removed from the latest version of this draft: http://tools.ietf.org/rfcdiff?url2=draft-ietf-softwire-ds-lite-tunnel-option-05.txt Is there any reason why this option has been removed? We would like to see this option back to the draft and that *** both *** the AFTR IP address and the name options are defined. FWIW, one of the deployment use cases we are considering is the distribution of the DS-Lite serviced customers among several (geo distributed) AFTRs by combining the search domain name dhcpv6 option (Code 24) and a generic FQDN conveyed in the AFTR name option. This would allow for a more controlled load distribution among deployed AFTRs. Cheers, Med -----Message d'origine----- De : softwires-boun...@ietf.org [mailto:softwires-boun...@ietf.org] De la part de internet-dra...@ietf.org Envoyé : lundi 27 septembre 2010 21:30 À : i-d-annou...@ietf.org Cc : softwires@ietf.org Objet : [Softwires] I-D Action:draft-ietf-softwire-ds-lite-tunnel-option-05.txt A New Internet-Draft is available from the on-line Internet-Drafts directories. This draft is a work item of the Softwires Working Group of the IETF. Title : Dynamic Host Configuration Protocol for IPv6 (DHCPv6) Option for Dual- Stack Lite Author(s) : D. Hankins, T. Mrugalski Filename : draft-ietf-softwire-ds-lite-tunnel-option-05.txt Pages : 6 Date : 2010-09-27 This document specifies single DHCPv6 option which is meant to be used by a Dual-Stack Lite client (Basic Bridging BroadBand element, B4) to discover its Address Family Transition Router (AFTR) address. A URL for this Internet-Draft is: http://www.ietf.org/internet-drafts/draft-ietf-softwire-ds-lite-tunnel-option-05.txt Internet-Drafts are also available by anonymous FTP at: ftp://ftp.ietf.org/internet-drafts/ Below is the data which will enable a MIME compliant mail reader implementation to automatically retrieve the ASCII version of the Internet-Draft. ********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ******************************** _______________________________________________ Softwires mailing list Softwires@ietf.org https://www.ietf.org/mailman/listinfo/softwires Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone indicate. La diffusione, copia o qualsiasi altra azione derivante dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate ricevuto questo documento per errore siete cortesemente pregati di darne immediata comunicazione al mittente e di provvedere alla sua distruzione, Grazie. This e-mail and any attachments is confidential and may contain privileged information intended for the addressee(s) only. Dissemination, copying, printing or use by anybody else is unauthorised. If you are not the intended recipient, please delete this message and any attachments and advise the sender by return e-mail, Thanks. _______________________________________________ Softwires mailing list Softwires@ietf.org https://www.ietf.org/mailman/listinfo/softwires ________________________________ _______________________________________________ Softwires mailing list Softwires@ietf.org https://www.ietf.org/mailman/listinfo/softwires ********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ********************************
_______________________________________________ Softwires mailing list Softwires@ietf.org https://www.ietf.org/mailman/listinfo/softwires
