Hi Ole, So the whole paragraph would read:
When receiving the Port Parameters option with an explicit PSID, the client MUST use this explicit PSID in configuring its softwire interface. The Port Parameters option with an explicit PSID MUST be discarded if the softwire node isn't configured with a full IPv4 address (e.g. IPv4 prefix). If so, fine with me. Cheers, Ian On 24 Apr 2014, at 10:15, Ole Troan <[email protected]> wrote: > Ian, > >> When receiving the Port Parameters option with an explicit PSID, the >> client MUST use this explicit PSID in configuring its softwire interface. >> If the client’s IPv4 address (configured via a separate sub-option) >> is not 32 bit-long, the Port Parameters option MUST be discarded. >> For MAP-E and MAP-T clients, the formula for the address length check >> is "prefix4-len + ea-len = 32” and serves to ensure that the explicit >> PSID is only applied to configurations with a completely formed IPv4 address. > > I don't like the implications that IPv4 address can be != 32 bits. ;-) > > just simply: > > The Port Parameters option with an explicit PSID MUST be discarded if the > softwire node isn't configured with a full IPv4 address (e.g. IPv4 prefix). > > ? > > cheers, > Ole > _______________________________________________ Softwires mailing list [email protected] https://www.ietf.org/mailman/listinfo/softwires
