Hi, No, data are on a USB disk driver and file are saved on hard disk. Furthermore, transfer are rapidly from 0 to 1.7 GB corresponding to MS1 data, and slow for 1.7 to 2 GB data corresponding to MS2 data. I have send you in private an url to download an wiff file to test directly.
The second point that was special is that all MS1 spectra are firstly write on the mzXML file from scan number 1 to 3000 and then all MS2 spectra from 3000 to 32000. In contrast, to have normally MS2 spectra included in the MS1 spectra. Moreover, the MS2 scans seems not correct or at least precursor value must be false, because i identified no peptides qith this file in contrast to analysed an mgf file produced by an ABSciex tools. If you have idea to correct this. Benoit On 20 jan, 16:47, Matthew Chambers <[email protected]> wrote: > 4 hours seems a bit long for a single file. Is it on a network drive? It > could be the output size as > well. Since that definitely sounds like profile data, you almost certainly > want to turn compression > on (-z option). > > -Matt > > On 1/20/2011 3:33 AM, Valot Beno t wrote: > > > > > > > > > Hello Nathan, > > > I'm finally find the dll from skyline installation. I'm transformed > > one data file (wiff of 500Mo), but conversion take 4 hours. I'm just > > indicated export on mzXML and --32. This is normal? The final mzXML > > file is 2Go. Because I'm using from a long time the ReaDW tools for > > Thermo Raw data, which take less than 10 min for final files of 1Go. > > To indication, the transformation are rapidly from 1 to 3000 spectra, > > then it take several hours from 3000 to 32000 spectra. I'm think that > > transformation of MS1 data are very speedily, and MS2 spectra slower. > > > I can send you data. > > > Benoit Valot -- You received this message because you are subscribed to the Google Groups "spctools-discuss" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/spctools-discuss?hl=en.
