is this log file useful?
Jun 28 19:30:07 xxxxx-yyyy kernel: ATM dev 0: ADSL line is synchronising
Jun 28 19:30:07 xxxxx-yyyy kernel: CSLIP: code copyright 1989 Regents of
the University of California
Jun 28 19:30:07 xxxxx-yyyy kernel: PPP generic driver version 2.4.2
Jun 28 19:30:07 xxxxx-yyyy kernel: pppoatm: module not supported by Novell,
setting U taint flag.
Jun 28 19:30:07 xxxxx-yyyy kernel: BIOS EDD facility v0.16 2004-Jun-25, 2
devices found
Jun 28 19:30:07 xxxxx-yyyy kernel: ATM dev 0: DSL line goes up
Jun 28 19:30:07 xxxxx-yyyy kernel: ATM dev 0: ADSL line is up (416 kb/s
down | 128 kb/s up)
Jun 28 19:30:08 xxxxx-yyyy ifup: lo
Jun 28 19:30:08 xxxxx-yyyy ifup: lo
Jun 28 19:30:09 xxxxx-yyyy ifup: IP address: 127.0.0.1/8
Jun 28 19:30:09 xxxxx-yyyy ifup:
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: Plugin pppoatm.so loaded.
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: PPPoATM plugin_init
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: PPPoATM setdevname_pppoatm -
SUCCESS:8.35
Jun 28 19:30:09 xxxxx-yyyy kernel: spurious 8259A interrupt: IRQ7.
Jun 28 19:30:09 xxxxx-yyyy kernel: NET: Registered protocol family 10
Jun 28 19:30:09 xxxxx-yyyy kernel: lo: Disabled Privacy Extensions
Jun 28 19:30:09 xxxxx-yyyy kernel: IPv6 over IPv4 tunneling driver
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: pppd 2.4.3 started by root, uid 0
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: Using interface ppp0
Jun 28 19:30:09 xxxxx-yyyy pppd[2182]: Connect: ppp0 <--> 8.35
Jun 28 19:30:11 xxxxx-yyyy ifup: sit0
Jun 28 19:30:11 xxxxx-yyyy ifup: No configuration found for sit0
Jun 28 19:30:15 xxxxx-yyyy ifup: eth0 device: VIA Technologies,
Inc. VT6105 [Rhine-III] (rev 86)
Jun 28 19:30:15 xxxxx-yyyy ifup: eth0 configuration:
eth-id-00:50:fc:c9:9a:fe
Jun 28 19:30:15 xxxxx-yyyy kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
Jun 28 19:30:15 xxxxx-yyyy ifup: eth0
Jun 28 19:30:15 xxxxx-yyyy ifup: IP address: 192.168.0.133/24
Jun 28 19:30:15 xxxxx-yyyy ifup:
Jun 28 19:30:16 xxxxx-yyyy ifup: dsl2
Jun 28 19:30:16 xxxxx-yyyy ifup: dsl2 Startmode is 'manual'
Jun 28 19:30:17 xxxxx-yyyy ifup: ppp0
Jun 28 19:30:17 xxxxx-yyyy ifup: ppp0 Startmode is 'manual'
Jun 28 19:30:17 xxxxx-yyyy mDNSResponder (Engineering Build) (Apr 23 2006
01:49:36) [3112]: starting
Jun 28 19:30:17 xxxxx-yyyy mDNSResponder: Unable to parse DNS server list.
Unicast DNS-SD unavailable
Jun 28 19:30:20 xxxxx-yyyy sshd[3220]: Server listening on :: port 22.
Jun 28 19:30:22 xxxxx-yyyy auditd[3268]: Init complete, auditd 1.1.3
listening for events
Jun 28 19:30:24 xxxxx-yyyy kernel: powernow: This module only works with
AMD K7 CPUs
Jun 28 19:30:26 xxxxx-yyyy rcpowersaved: CPU frequency scaling is not
supported by your processor.
Jun 28 19:30:26 xxxxx-yyyy rcpowersaved: enter 'CPUFREQ_ENABLED=no' in
/etc/powersave/cpufreq to avoid this warning.
Jun 28 19:30:26 xxxxx-yyyy rcpowersaved: Cannot load cpufreq governors - No
cpufreq driver available
Jun 28 19:30:26 xxxxx-yyyy kernel: eth0: no IPv6 routers present
Jun 28 19:30:27 xxxxx-yyyy rcpowersaved: s2ram does not know your machine.
See 's2ram -i' for details. (127)
Jun 28 19:30:30 xxxxx-yyyy smpppd[3397]: smpppd version 1.59 started
Jun 28 19:30:39 xxxxx-yyyy pppd[2182]: LCP: timeout sending Config-Requests
Jun 28 19:30:39 xxxxx-yyyy pppd[2182]: Connection terminated.
Jun 28 19:30:39 xxxxx-yyyy pppd[2182]: Modem hangup
Jun 28 19:30:39 xxxxx-yyyy pppd[2182]: Exit.
Jun 28 19:30:47 xxxxx-yyyy kernel: ip6_tables: (C) 2000-2006 Netfilter Core
Team
Jun 28 19:30:47 xxxxx-yyyy PAM-devperm[3366]: opendir(/dev/snd/*): No such
file or directory
Jun 28 19:30:47 xxxxx-yyyy SuSEfirewall2: Warning: ip6tables does not
support state matching. Extended IPv6 support disabled.
Jun 28 19:30:48 xxxxx-yyyy SuSEfirewall2: Setting up rules from
/etc/sysconfig/SuSEfirewall2 ...
Jun 28 19:30:49 xxxxx-yyyy SuSEfirewall2: Warning: no interface active
Jun 28 19:30:50 xxxxx-yyyy kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 28 19:30:50 xxxxx-yyyy kernel: Netfilter messages via NETLINK v0.30.
Jun 28 19:30:50 xxxxx-yyyy kernel: ip_conntrack version 2.4 (1015 buckets,
8120 max) - 232 bytes per conntrack
Jun 28 19:30:51 xxxxx-yyyy SuSEfirewall2: Warning:
FW_ALLOW_INCOMING_HIGHPORTS_UDP=DNS is no longer supported
Jun 28 19:30:51 xxxxx-yyyy SuSEfirewall2: batch committing...
Jun 28 19:30:54 xxxxx-yyyy SuSEfirewall2: Firewall rules successfully set
Jun 28 19:30:55 xxxxx-yyyy zmd: Daemon (WARN): Not starting remote web server
Jun 28 19:31:21 xxxxx-yyyy kernel: SFW2-IN-ILL-TARGET IN=eth0 OUT= MAC=
SRC=192.168.0.133 DST=224.0.0.251 LEN=112 TOS=0x00 PREC=0x00 TTL=255 ID=0
DF PROTO=UDP SPT=5353 DPT=5353 LEN=92
Jun 28 19:31:27 xxxxx-yyyy hp: unable to open /var/run/hpiod.port: No such
file or directory: prnt/hpijs/hplip_api.c 84
in the meantime i tried something else..
i have an old notebook.. famous gericom t6 with the bios troubles which
cause harddisk errors..
so when i start thr notebook, i have to boot from the installation cd.. and
when the installation routine finds the installed system on my usb harddisk
i can boot..
so..
i cleaned this disk, installed suse 10.1 on it,
and tried the firmware speedtouch installation again, but that doesn't work
either..
when it boots it tells firmware not loaded...
baba jürgen
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
