> As I drive a Fedora, I don't know the mysteries of Suse. But I
>have put a debug and a kdebug 5 in /etc/ppp/peers/speedtch and I get a lot
>of messages from the kernel, very useful. I think you can put it also in
>/etc/ppp/options.
>
> Why are you not working as root? It is more confusing, yet...
>
>
>
> Juan Carlos
hai...
i did it.. now it doesn't boot anymore.. have to check whats wrong..
:(
but i did the same on my old sysm (suse 9.2 upgraded 10.1)
and to my surprise the kinternetsymbol on the task list this kein of plug
moves into the socket for the first time..
(what a success!! :)
but there is no connection.. even can't get a log.. log is empty..
get an error:
no name server found in /etc/resolv.conf
and cannot read: /proc/net/route
that is what i get when i boot...
<6>hub 1-2:1.0: USB hub found
<6>hub 1-2:1.0: 4 ports detected
<6>usb 1-2.4: new full speed USB device using uhci_hcd and address 3
<6>usb 1-2.4: new device found, idVendor=06b9, idProduct=4061
<6>usb 1-2.4: new device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-2.4: Product: Speed Touch 330
<6>usb 1-2.4: Manufacturer: ALCATEL
<6>usb 1-2.4: SerialNumber: 0090D09D32C6
<6>usb 1-2.4: configuration #1 chosen from 1 choice
<6>i810_smbus 0000:00:01.0: i810/i815 i2c device found.
<6>hw_random hardware driver 1.0.0 loaded
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<4>atm: module not supported by Novell, setting U taint flag.
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>usbatm: module not supported by Novell, setting U taint flag.
<6>usb 1-2.4: reset full speed USB device using uhci_hcd and address 3
<6>usbcore: registered new driver speedtch
<6>speedtch 1-2.4:1.0: found stage 1 firmware speedtch-1.bin
<6>speedtch 1-2.4:1.0: found stage 2 firmware speedtch-2.bin
<6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [EMAIL PROTECTED]
<7>dm-netlink version 0.0.2 loaded
<6>loop: loaded (max 8 devices)
<3>FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
<3>FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
<6>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
<5>audit(1153391149.805:2): AppArmor (version 2.0-19.43r6320) initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Jul 20
12:25:33 2006
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneActivating swap-devices in /etc/fstab...
donedone
Starting udevd done
Loading required kernel modules
doneActivating device mapper...
done
Starting MD Raid done
Checking file systems...
fsck 1.38 (30-Jun-2005)
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /windows/C type vfat
(rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdb1 on /windows/D type vfat
(rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
doneSetting up the hardware clockdone
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Creating /var/log/boot.msg
done<notice>killproc: kill(724,29)
Activating remaining swap-devices in /etc/fstab...
doneTurning quota on
Checking quotas. This may take some time.
done
Setting scheduling timeslices unused
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'linux-geli'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
done
System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(724,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Thu Jul 20 10:26:00 2006
Master Resource Control: previous runlevel: N, switching to runlevel: 5
acpid: no ACPI support in kernelskipped
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon
--system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux
SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5
PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent
SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc
DAEMON=/usr/bin/dbus-daemon ]
Loading AppArmor profiles - AppArmor already loaded with profiles. Not
loading profiles. warning
Starting D-BUS daemondone
<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a
/var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log ],
[ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/
PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 SPLASH=no splash=silent
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/
PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 SPLASH=no splash=silent
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes
--retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N
LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3
_=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
eth0 configuration: eth-id-00:50:fc:c9:9a:fe
eth0 IP address: 192.168.0.133/24
done ppp0
ppp0 Startmode is 'manual'
skippedSetting up service
network . . . . . . . . . . . . . . . .done
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f
/etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N
LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3
_=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console
ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N
LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3
_=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting ZENworks Management Daemondone
ATM dev 0: ADSL line is up (416 kb/s down | 128 kb/s up)
Plugin pppoatm.so loaded.
PPPoATM plugin_init
PPPoATM setdevname_pppoatm - SUCCESS:8.35
using channel 1
Using interface ppp0
Connect: ppp0 <--> 8.35
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux
ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86
KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80
PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/
LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 HOME=/ SHLVL=2
XCURSOR_THEME=crystalwhite no_proxy=localhost
WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 SPLASH=no
splash=silent ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc
DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)<notice>startproc: execve
(/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ HOME=/
PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N
DAEMON=/usr/sbin/powersaved ]
done
Starting powersaved: This machine supports APM done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s
/etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL=
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ LC_CTYPE=
splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc
DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [
CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1
COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG=
PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
sent [LCP ConfReq id=0x1 <magic 0xdac3a096>]
LCP: timeout sending Config-Requests
Connection terminated.
Modem hangup
<notice>checkproc: /opt/kde3/bin/kdm 3235
Module "perl" is not installed, ignoring.
Check the APACHE_MODULES setting in /etc/sysconfig/apache2.
Starting httpd2 (prefork) <notice>startproc: execve
(/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f
/etc/apache2/httpd.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs
TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 get_module_list_done=true
LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80
get_includes_done=true PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/
SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ splash=silent SPLASH=no
ROOTFS_BLKDEV=/dev/hda3 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
<notice>checkproc: /opt/kde3/bin/kdm 3235
done
Starting Firewall Initialization (phase 2 of 2) <notice>killproc: kill(3213,15)
SuSEfirewall2: Warning: ip6tables does not support state matching. Extended
IPv6 support disabled.
SuSEfirewall2: Warning: no interface active
SuSEfirewall2: Warning: FW_ALLOW_INCOMING_HIGHPORTS_UDP=DNS is no longer
supported
done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: acpid splash smbfs
<notice>killproc: kill(1784,3)
oh the other new 10.1 system the firmware doesn't even load
baba jürgen
___________________________________________________________
Der frühe Vogel fängt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail:
http://mail.yahoo.de
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
