Check the annex, and look at the "Calculation Sheet".

Like someone said, it's not rocket science.

David Autry
Plans Examiner
Nebraska State Fire Marshal's Office
246 S. 14th Street
Lincoln, NE 68508
402-471-9659
402-471-3118 fax
www.sfm.ne.gov

** Note new email address: david.au...@nebraska.gov

-----Original Message-----
From: sprinklerforum-boun...@firesprinkler.org 
[mailto:sprinklerforum-boun...@firesprinkler.org] On Behalf Of Steve Leyton
Sent: Friday, February 20, 2009 11:14 AM
To: sprinklerforum@firesprinkler.org
Subject: RE: Residential systems in California

Why not?   Why wouldn't they?  Why, specifically, COULDN'T they?

BTW, check out the new pipe sizing and meter loss tables adopted for
2009 13D.  There is now a prescriptive or "scheduled" design alternative
to the hydraulic calculation method.   This information is the same as
that adopted by ICC for the plumbing code standards pursuant to the IRC
code changes.

Steve Leyton
Protection Design & Consulting
San Diego, CA




-----Original Message-----
From: sprinklerforum-boun...@firesprinkler.org
[mailto:sprinklerforum-boun...@firesprinkler.org] On Behalf Of Todd
Williams
Sent: Friday, February 20, 2009 8:40 AM
To: sprinklerforum@firesprinkler.org
Subject: RE: Residential systems in California

Are plumbing designers going to start doing hydraulic calculations?



At 11:09 AM 2/20/2009, you wrote:
>Never mind raising eyebrows, how is our industry going to find the
>thousands of design tech's and literally dozens of thousands of
>installers necessary to serve this market?   Plumbing contractors are
>going to start doing this work- both conventional and MP systems -
>regardless of licensing or code or jurisdictional variables.   BECAUSE
>IT MAKES GOOD BUSINESS SENSE.   And who's to stop them?   Homebuilders
>will appreciate the one-stop shopping and many plumbing contractors
>already have design departments.   I've said this dozens of times
>already in this forum but I'll say it again - it's not rocket science.
>
>
>Steve Leyton
>Protection Design & Consulting
>San Diego, CA
>
>
>
>
>-----Original Message-----
>From: sprinklerforum-boun...@firesprinkler.org
>[mailto:sprinklerforum-boun...@firesprinkler.org] On Behalf Of Ed
Kramer
>Sent: Thursday, February 19, 2009 7:13 PM
>To: sprinklerforum@firesprinkler.org
>Subject: RE: Residential systems in California
>
>For the sprinkler contractors who don't hold a plumbing license: if
>there is
>no BFP, then the entire sprinkler system is potable.  That's work you
no
>longer have access to.  Does that raise any eyebrows?
>
>Ed Kramer
>Littleton, CO
>
>
> > "To address the issue of backflow prevention, one discussion the
> > committee is having is the viability of placing a toilet on the
> > hydraulic end of the sprinkler system ..."
> >
> > Great. Now I have to learn to install toilets. Will this function as
>the
> > inspectors test too? Won't the alarm sound whenever you flush?
>
>
>_______________________________________________
>Sprinklerforum mailing list
>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>For Technical Assistance, send an email to:
>techsupp...@firesprinkler.org
>
>To Unsubscribe, send an email
>to:sprinklerforum-requ...@firesprinkler.org
>(Put the word unsubscribe in the subject field)
>
>
>__________ Information from ESET NOD32 Antivirus, version of virus
>signature database 3869 (20090219) __________
>
>The message was checked by ESET NOD32 Antivirus.
>
>http://www.eset.com
>
>
>
>__________ Information from ESET NOD32 Antivirus, version of virus
>signature database 3873 (20090220) __________
>
>The message was checked by ESET NOD32 Antivirus.
>
>http://www.eset.com
>
>_______________________________________________
>Sprinklerforum mailing list
>http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>For Technical Assistance, send an email to:
techsupp...@firesprinkler.org
>
>To Unsubscribe, send an email
to:sprinklerforum-requ...@firesprinkler.org
>(Put the word unsubscribe in the subject field)

Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
www.fpdc.com
860.535.2080
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to:
techsupp...@firesprinkler.org

To Unsubscribe, send an email
to:sprinklerforum-requ...@firesprinkler.org
(Put the word unsubscribe in the subject field)


__________ Information from ESET NOD32 Antivirus, version of virus
signature database 3874 (20090220) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus
signature database 3874 (20090220) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: techsupp...@firesprinkler.org

To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: techsupp...@firesprinkler.org

To Unsubscribe, send an email to:sprinklerforum-requ...@firesprinkler.org
(Put the word unsubscribe in the subject field)

Reply via email to