NFPA 13 only says to install intermediate Temperature Sprinkler heads beneath 
Skylights. It is not a requirement of 13 to shield the head.

 

Regards,

G. Tim Stone

 

G. Tim Stone Consulting, LLC

NICET Level III Engineering Technician

Fire Protection Sprinkler Design

and Consulting Services

 

   117 Old Stage Rd. - Essex Jct., VT. 05452

CELL: (802) 373-0638   TEL: (802) 434-2968

              <mailto:[email protected]> [email protected]

 

 

 

From: Sprinklerforum <[email protected]> On Behalf 
Of Luis Perea
Sent: Monday, August 13, 2018 11:23 AM
To: [email protected]
Subject: RE: Baffle for fire sprinkler system

 

Why are you wanting to shield a head located under a Skylight?

 

Unfortunately some HVAC ducts already have been installed and because of this a 
couple of sprinklers must be placed under the skylight to comply with the cover 
areas, I want to shield the sprinkler to avoid any damage to the sprinkler if 
the skylight melt in case of fire.

 

De: Sprinklerforum [mailto:[email protected]] En 
nombre de [email protected] <mailto:[email protected]> 
Enviado el: lunes, 13 de agosto de 2018 09:04 a. m.
Para: [email protected] 
<mailto:[email protected]> 
Asunto: RE: Baffle for fire sprinkler system

 

If you want a shielded sprinkler head, use a listed Intermediate level 
sprinkler head.

Why are you wanting to shield a head located under a Skylight?

 

Regards,

G. Tim Stone

 

G. Tim Stone Consulting, LLC

NICET Level III Engineering Technician

Fire Protection Sprinkler Design

and Consulting Services

 

   117 Old Stage Rd. - Essex Jct., VT. 05452

CELL: (802) 373-0638   TEL: (802) 434-2968

              <mailto:[email protected]> [email protected]

 

 

 

 

From: Sprinklerforum < <mailto:[email protected]> 
[email protected]> On Behalf Of Luis Perea
Sent: Monday, August 13, 2018 10:54 AM
To:  <mailto:[email protected]> 
[email protected]
Subject: Baffle for fire sprinkler system

 

Does anyone know if there is a standard size of baffles to protect sprinklers?

 

Some sprinklers are located under the skylight but NFPA does not mention 
anything related to the baffle size. 

I´m currently using a galvanized steel 12” x 12” shield to protect the 
sprinkler.

Do you have any Thoughts?

 

 



_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to