Some heat/smoke vents drop out by the plastic deforming and dropping out of frame. Without reading the label you never know which is which.
I’ve never considered this before. The vents we saw were just installed on a 6x6” curb. We discouraged sprinklers under vents. If head is operating it’s quite effective at preventing smoke from coming out. Open the surrounding rows or start up the vrddn vrddn. Best. Bruce > On Aug 13, 2018, at 08:52, Prahl, Craig/GVL <[email protected]> wrote: > > Is the skylight plastic? Have you asked the architect? Even if it is, it is > VERY unlikely that the skylight would melt before sprinklers were activated. > > Typically, these types of commercial skylights are sandwiched glass panels. > > > > Craig Prahl | Jacobs | Group Lead – Fire Protection | 864.676.5252 | > [email protected] | www.jacobs.com > > From: Sprinklerforum <[email protected]> On > Behalf Of Luis Perea > Sent: Monday, August 13, 2018 11:23 AM > To: [email protected] > Subject: [EXTERNAL] RE: Baffle for fire sprinkler system > > Why are you wanting to shield a head located under a Skylight? > > Unfortunately some HVAC ducts already have been installed and because of this > a couple of sprinklers must be placed under the skylight to comply with the > cover areas, I want to shield the sprinkler to avoid any damage to the > sprinkler if the skylight melt in case of fire. > > De: Sprinklerforum [mailto:[email protected]] En > nombre de [email protected] > Enviado el: lunes, 13 de agosto de 2018 09:04 a. m. > Para: [email protected] > Asunto: RE: Baffle for fire sprinkler system > > If you want a shielded sprinkler head, use a listed Intermediate level > sprinkler head. > Why are you wanting to shield a head located under a Skylight? > > Regards, > G. Tim Stone > > G. Tim Stone Consulting, LLC > NICET Level III Engineering Technician > Fire Protection Sprinkler Design > and Consulting Services > > 117 Old Stage Rd. - Essex Jct., VT. 05452 > CELL: (802) 373-0638 TEL: (802) 434-2968 > [email protected] > > > > > From: Sprinklerforum <[email protected]> On > Behalf Of Luis Perea > Sent: Monday, August 13, 2018 10:54 AM > To: [email protected] > Subject: Baffle for fire sprinkler system > > Does anyone know if there is a standard size of baffles to protect sprinklers? > > Some sprinklers are located under the skylight but NFPA does not mention > anything related to the baffle size. > I´m currently using a galvanized steel 12” x 12” shield to protect the > sprinkler. > Do you have any Thoughts? > > > <image001.jpg> > ________________________________________________________________________________________ > > NOTICE - This communication may contain confidential and privileged > information that is for the sole use of the intended recipient. Any viewing, > copying or distribution of, or reliance on this message by unintended > recipients is strictly prohibited. If you have received this message in > error, please notify us immediately by replying to the message and deleting > it from your computer. > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
