jasell wrote:
> OK, I'm doing a clean install.
> Stopping everything, removing QLMS app from appcenter, system reboot.
> Manual install from appcenter...
>
> same install behaviour.
> -First quickly up to 45%, wait for a moment
> -Then quickly up to 75%, wait for a moment
> -Then up to 100%
>
> Qnap log events...
> >
Code:
--------------------
> > Information2018/02/1113:21:16System127.0.0.1localhost[App Center]
QLogitechMediaServer enabled.
> Warning2018/02/1113:21:06System127.0.0.1localhost[QLogitechMediaServer]
Something went wrong, check the
/share/MD0_DATA/.qpkg/LogitechMediaServer/LogitechMediaServer.log.err and
you're configuration! You could Try /etc/init.d/LogitechMediaServer.sh
failsafe, or reinstall QPKG!
> Warning2018/02/1113:20:19System127.0.0.1localhost[QLogitechMediaServer]
Upgrading LogitechMediaServer to 7.9.1-1517314665, please wait !
> Warning2018/02/1113:19:58System127.0.0.1localhost[QLogitechMediaServer]
Please wait a few minuts, have to build LMS from scratch !
> Information2018/02/1113:19:57System127.0.0.1localhost[App Center]
QLogitechMediaServer 1.07 has been installed in
/share/MD0_DATA/.qpkg/LogitechMediaServer successfully.
> Information2018/02/1113:16:38System127.0.0.1localhostSystem started.
> Information2018/02/1113:13:09System127.0.0.1localhostSystem was shut down
on Sun Feb 11 13:13:09 CET 2018.
> Information2018/02/1113:11:32admin192.168.6.187---[Power Management] System
restarting.
--------------------
> >
>
> QLMS is not running...
> >
Code:
--------------------
> > [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
status
> LogitechMediaServer is not running, do ./LogitechMediaServer.sh start to
start services !
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ps | grep
[L]ogitechMediaServer
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # /bin/pidof slimserver.pl
>
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] #
--------------------
> >
>
> -->see attached logs (1st)
>
> Trying to start manually [ ./LogitechMediaServer.sh start ], fails, no
> process running (same as above)
>
> Adjusting ownership [ chown -R squeezeboxserver:everyone SlimServer/ ]
> and then starting [ ./LogitechMediaServer.sh start ], fails.
> But slimserver.pl process is running! No web GUI however...
> >
Code:
--------------------
> > [/share/MD0_DATA/.qpkg/LogitechMediaServer] # chown -R
squeezeboxserver:everyone SlimServer/
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
start Something went wrong, check the
/share/MD0_DATA/.qpkg/LogitechMediaServer/LogitechMediaServer.log.err and
you're configuration! You could Try ./LogitechMediaServer.sh failsafe, or
reinstall QPKG!
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # /bin/pidof slimserver.pl
24801
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ps | grep
[L]ogitechMediaServer
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ps | grep squeezeboxserver
> 24801 squeezeboxserver 75080 S /usr/bin/perl
/share/MD0_DATA/.qpkg/LogitechM
> 26819 admin 536 R grep squeezeboxserver
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] #
>
--------------------
> >
>
> --> see attached logs (2nd)
>
> Killing the the slimserver.pl manually.
> Then adjusting access [ chmod -R 0755 SlimServer/ ] and owner [ chown
> -R squeezeboxserver:everyone SlimServer/ ].
> Then new start attempt [ ./LogitechMediaServer.sh start ], fails to
> start, but slimserver process runs.
> Web GUI works as well and I can start to set up LMS...
>
> >
Code:
--------------------
> > [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ps | grep squeezeboxserver
> 32046 squeezeboxserver 82472 S /usr/bin/perl
/share/MD0_DATA/.qpkg/LogitechM
> 32205 admin 532 R grep squeezeboxserver
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # kill 32046
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # chmod -R 0755 SlimServer/
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # chown -R
squeezeboxserver:everyone SlimServer/
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
start Something went wrong, check the
/share/MD0_DATA/.qpkg/LogitechMediaServer/LogitechMediaServer.log.err and
you're configuration! You could Try ./LogitechMediaServer.sh failsafe, or
reinstall QPKG!
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ps | grep squeezeboxserver
590 squeezeboxserver 80396 S /usr/bin/perl
/share/MD0_DATA/.qpkg/LogitechM
> 1567 admin 284 S grep squeezeboxserver
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] #
--------------------
> >
>
> --> see attached logs (3rd)Try a reboot of you're NAS system.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*
------------------------------------------------------------------------
digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292
_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
