digimaster wrote:
> The twice startup error comes from within LMS, it can only claim a poort
> once.
> The second time will give a error.
> So or there is a command, not working proper like SUDO/RENICE or one
> from busybox.
> Or there is already something running which is using 9001.
> Another thing to try is, in the .QLMS.config file set the httpport to
> 9050.
> And then restart the QNap. If its start without error you should get the
> webgui ad (QNap ip):9050.
>
--> in .QLMS.conf I changed #HTTPPORT="" to HTTPPORT="9050" but this
doesn't seem to work propely, this is what i get in the log
It looks like the start command is not using any port all instead of
using 9050
Code:
--------------------
[15:32:15 17-02-2018] CMDLINE --daemon --user squeezeboxserver --pidfile
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/LogitechMediaServer.pid
--httpport 9001 --priority -10 --charset=utf8 --quiet
[15:32:17 17-02-2018] Something went wrong, check the
/share/MD0_DATA/.qpkg/LogitechMediaServer/LogitechMediaServer.log.err and
you're configuration! You could Try ./LogitechMediaServer.sh failsafe, or
reinstall QPKG!
[15:33:30 17-02-2018] CMDLINE --daemon --user squeezeboxserver --pidfile
/share/MD0_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/LogitechMediaServer.pid
--httpport --priority -10 --charset=utf8 --quiet
[15:33:33 17-02-2018] Something went wrong, check the
/share/MD0_DATA/.qpkg/LogitechMediaServer/LogitechMediaServer.log.err and
you're configuration! You could Try ./LogitechMediaServer.sh failsafe, or
reinstall QPKG!
--------------------
>
> And please while testing, disable any optware, and check of there is
> nothing on /opt.
> If so do rm /opt.
> [ Did you ever tried to install SlimServer from the ipkg/opkg
> repository, is that could cause the trouble remove /opt ]
>
--> I did rm /opt there was only one tgz-file in there
>
> If there is a renice on /bin/renice do rm /bin/renice.
>
--> I did rm /bin/renice (it was linked to busybox)
>
> Some where something is what is causing this error.
> Keep in mind poort 9001 can only be used once, and when reading you're
> logs that the error.
> So or QLogitechMediaServer is starting twice, could be if there is a
> trouble with sudo or renice .( but dont belive this, because #SUDO and
> #RENICE would stop to uses )
>
> Or something is using 9001 already.
> The init-script will only start LMS only once.
> Or there is still another copy off another lms some where on the QNAP.
> You could also do [ ls /etc/init.d/ ] and look at the listing, there
> should only be one LogitechMediaServer.sh.
> Also look there at anything like ssots/ssods, SSOTS/SSODS or something
> with logitech or lms in the filename.
> If there is something like that, or more then one QLOgitechMediaServer,
> that could be why the another copy is already running error.
>
--> Only one copy of LogitechMediaServer.sh
>
> Must say you're error is very interesting, wish i could sit at you're pc
> and look at it through putty.
> To find out what is causing this, to learn from it for future releases
> to prevent something like this.
>
--> you are welcome, can we arrange a remote session?
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x Boom, 2x SB3 Classic
Other: iPeng on iPad and iPhone
------------------------------------------------------------------------
jasell's Profile: http://forums.slimdevices.com/member.php?userid=17817
View this thread: http://forums.slimdevices.com/showthread.php?t=108292
_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
