I would not say it's hardware, especially if you get a link to the switch.
>From the boot failure I see that you are running Solaris 10. If it's U3 or >higher you can gather the output from the layers above the qlc driver. Check >out this excellent presentation: http://blogs.sun.com/jmcp/resource/Getting_to_know_the_SAN_stack.pdf On slide 30 it shows the dcmd use of ::fptrace within MDB. The output from that will tell us a lot. You could also enable extended logging in the /kernel/drv/qlc.conf and reboot. Then post back here and attach the /var/adm/messages along with the fptrace output. This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
