? The printer setting DATA CR Code : CR=CR LF Code : LF=CR+LF Zero : Normal INTERFACE Type: RS232_1 Baud rate: 9600 Data bits : 8 Stop bits: 1 Parity: None Protocol: Ready/Busy CTS: Valid EMULATION Emulation type : Epson Epson Country: US-ASCII Character Table: Graphic1 IBM Character set : set1 AGM mode : off IBM 4722 : off Olivetti Sub Emulation : PR2 Vertical resol. : 1/240 Select Options RS232_2 : off MSR-H : off MICR : off Scanner : off MSR-V : off there is a difference between RS232_2 and RS232_1 ? Thks, Kamal ________________________________
De: [EMAIL PROTECTED] de la part de Craig Bender Date: mar. 06/03/2007 16:03 ÃEUR: SunRay-Users mailing list Objet : Re: RE : [SunRay-Users] Serial Printer Driver -IBM EPSON Proprinter Emulation- It's up to the program to change these parameters. Even if you were to use stty, the DTU will reset to safe settings (9600, 8, N, 1) after each open. Since most printer drivers are not set to program serial port correctly you need to set the printer to match 9600, 8, N, 1. mouline wrote: > Hello, > > 1) when I choose the Generic printer an what ever printer model I have > some times I have scrambled characters and some time a text is printed : > PS-Adobe-3.0 > Creator : Gnome Print Version 2.6.0 > ...... > ...... > 2) when I choose to print Banner: the Banner is printed perfectly !!! > there is a way to use the driver/filter to print the banner ? > > 3) How can I see the serial interface parameters configuration on > the DTU ? and how can I change it ? > > Thank you, > Kamal > ------------------------------------------------------------------------ > *De:* mouline > *Date:* lun. 05/03/2007 16:21 > *ÃEUR:* SunRay-Users mailing list > *Objet :* RE : [SunRay-Users] Serial Printer Driver -IBM EPSON > Proprinter Emulation- > > ? ? > > When I do a > > # cat printingTesttxt > /tmp/SUNWut/units/IEEE802.00144f102cd3/dev/term/a > > It work the first time, but when I do it again the DTU is diconnected !! > > when I reconnect I have the same thing the cat to the printer work on time, > > and on the second time the DTU is disconnected !! > > On the printer doc the printer interface must be set to 9600, 8, N, 1 > > what do you think ? and how can I set the printer to 9600, 8, N, 1 > > B.R, > > Kamal > > > > ------------------------------------------------------------------------ > > De: [EMAIL PROTECTED] de la part de Craig Bender > Date: lun. 05/03/2007 15:53 > æ#8364;: SunRay-Users mailing list > Objet : Re: [SunRay-Users] Serial Printer Driver -IBM EPSON Proprinter > Emulation- > > Are you sure it's a printer driver issue? Can you cat a text file out > > to the printer? > > > > You'll probably want to ensure that the printer is set to 9600, 8, N, 1 > > > > > > mouline wrote: > >> ? > >> Hello Sun Ray Users, > >> > >> I have a Tally serial printer attached to a Sun Ray 170 > >> that is compatible to EPSON or IBM Proprinter emulation, > >> > >> In PrintManager on Printer Model there is only IBM ProPrinter II, but it > >> doesn't work for this printer. > >> > >> I run SunOS TEST 5.10 Generic_118844-26 i86pc i386 i86pc ; > > >currentFW=3.1_32,REV=2005.08.24.08.55 > >> > >> Any one have an Idea on the driver to use ? > >> > >> Best regards, > >> Kamal > >> > >> > >> > >> ------------------------------------------------------------------------ > >> > >> _______________________________________________ > >> SunRay-Users mailing list > >> [email protected] > >> http://node1.filibeto.org/mailman/listinfo/sunray-users > > _______________________________________________ > > SunRay-Users mailing list > > [email protected] > > http://node1.filibeto.org/mailman/listinfo/sunray-users > > > ------------------------------------------------------------------------ > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://node1.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://node1.filibeto.org/mailman/listinfo/sunray-users
<<winmail.dat>>
_______________________________________________ SunRay-Users mailing list [email protected] http://node1.filibeto.org/mailman/listinfo/sunray-users
