Are you sure your FOG is configured properly?
What does "utgstatus" show from each host?
-Bob
[EMAIL PROTECTED] wrote:
HI Bob,
Yeah, I am using SRSS 3.1 and windows connector CAM script.
I have 3 SRSS servers running, and LB is turned on. No matter what I do,
idle or active session refuses to attach to the lowest load server.
Currently, svr1 & svr3 are loaded while svr2 has no sessions. I have tired
many cold-restart from the web admin to force the LB issue but the
system will never load the 3 server equally. It will always leave 1 server
empty.
During the utadm setup, the script asks if I wanted to specify an
authentication server list. Should I add all 3 servers? Or just leave it as
default?
Regards,
Alan
Bob Doolittle
<Robert.Doolittle
@Sun.COM> To
Sent by: SunRay-Users mailing list
sunray-users-boun <[email protected]>
[EMAIL PROTECTED] cc
Subject
03/10/2007 01:06 Re: [SunRay-Users] Manual
failover/load-balance?
Please respond to
SunRay-Users
mailing list
<[EMAIL PROTECTED]
ibeto.org>
I presume you are using the CAM mode from SRSS 3.1 or previous?
You shouldn't have any LB issues if you use Kiosk mode in SRSS 4.0
or if you use standard login sessions for any version of SRSS with the
NSCM policy enabled.
-Bob
Disclaimer: Opinions expressed in this mail are my own,
and are not necessarily shared by my employer
[EMAIL PROTECTED] wrote:
Hi,
Is there a way to manually failover/load-balance sunray sessions from pri
server to other sec servers?
The LB thingy is so stupid that all the load (abt 30+) is on Pri server
and
the other 2 sec servers have only 2 sunray sessions each.
I tired to terminate the session but it still re-attaches itself to pri
server.
Also, I am having a lot of core-dumps related to uttsc-bin.
Regards,
Alan
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
***************************************************************************
IMPORTANT NOTICE:
This email and any files transmitted with it is intended only for
the use of the person(s) to whom it is addressed, and may
contain information that is privileged, confidential and exempt
from disclosure under applicable law. If you are not the intended
recipient, please immediately notify the sender and delete
the email. Thank you.
***************************************************************************
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
