Hi,
> Are you sure your FOG is configured properly?
I would think so. "utreplica -l" seems to show that's the case.
> What does "utgstatus" show from each host?
Results from 3 sunray servers using utstatus:
Server 1:
# ./utgstatus
host flags interface flags interface flags
192.168.16.0/24 192.168.20.0/24
---------- ------------------- -------------------
sunray1 T- 192.168.16.21 UA- 192.168.20.21 UA-
sunray3 T- 192.168.16.23 UA- 192.168.20.23 UA-
sunray2 T- 192.168.16.22 UA- 192.168.20.22 UA-
#
Server 2:
# ./utgstatus
host flags interface flags interface flags
192.168.16.0/24 192.168.20.0/24
---------- ------------------- -------------------
sunray2 T- 192.168.16.22 UA- 192.168.20.22 UA-
sunray1 T- 192.168.16.21 UA- 192.168.20.21 UA-
sunray3 T- 192.168.16.23 UA- 192.168.20.23 UA-
#
Server 3:
# ./utgstatus
host flags interface flags interface flags
192.168.16.0/24 192.168.20.0/24
---------- ------------------- -------------------
sunray3 T- 192.168.16.23 UA- 192.168.20.23 UA-
sunray1 T- 192.168.16.21 UA- 192.168.20.21 UA-
sunray2 T- 192.168.16.22 UA- 192.168.20.22 UA-
#
Hope this helps.
Regards,
Alan
[EMAIL PROTECTED] wrote on 04/10/2007 23:04:51:
> Are you sure your FOG is configured properly?
> What does "utgstatus" show from each host?
>
> -Bob
>
> [EMAIL PROTECTED] wrote:
> > HI Bob,
> >
> > Yeah, I am using SRSS 3.1 and windows connector CAM script.
> >
> > I have 3 SRSS servers running, and LB is turned on. No matter what I
do,
> > idle or active session refuses to attach to the lowest load server.
> > Currently, svr1 & svr3 are loaded while svr2 has no sessions. I have
tired
> > many cold-restart from the web admin to force the LB issue but the
> > system will never load the 3 server equally. It will always leave 1
server
> > empty.
> >
> > During the utadm setup, the script asks if I wanted to specify an
> > authentication server list. Should I add all 3 servers? Or just leave
it as
> > default?
> >
> > Regards,
> > Alan
> >
> >
> >
> >
> >
> >
> >
> > Bob Doolittle
> > <Robert.Doolittle
> > @Sun.COM>
To
> > Sent by: SunRay-Users mailing list
> > sunray-users-boun <[email protected]>
> > [EMAIL PROTECTED]
cc
> >
> >
Subject
> > 03/10/2007 01:06 Re: [SunRay-Users] Manual
> > failover/load-balance?
> >
> > Please respond to
> > SunRay-Users
> > mailing list
> > <[EMAIL PROTECTED]
> > ibeto.org>
> >
> >
> >
> >
> >
> >
> > I presume you are using the CAM mode from SRSS 3.1 or previous?
> >
> > You shouldn't have any LB issues if you use Kiosk mode in SRSS 4.0
> > or if you use standard login sessions for any version of SRSS with the
> > NSCM policy enabled.
> >
> > -Bob
> >
> > Disclaimer: Opinions expressed in this mail are my own,
> > and are not necessarily shared by my employer
> >
> > [EMAIL PROTECTED] wrote:
> >
> >> Hi,
> >>
> >> Is there a way to manually failover/load-balance sunray sessions from
pri
> >> server to other sec servers?
> >> The LB thingy is so stupid that all the load (abt 30+) is on Pri
server
> >>
> > and
> >
> >> the other 2 sec servers have only 2 sunray sessions each.
> >>
> >> I tired to terminate the session but it still re-attaches itself to
pri
> >> server.
> >>
> >> Also, I am having a lot of core-dumps related to uttsc-bin.
> >>
> >> Regards,
> >> Alan
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
>
********************************************************************************
> >
> >
> >> IMPORTANT NOTICE: This email and any files transmitted with it is
> >> intended only for the use of the person(s) to whom it is addressed,
and
> >> may contain information that is privileged, confidential and exempt
from
> >> disclosure under applicable law. If you are not the intended
recipient,
> >> please immediately notify the sender and delete the email. Thank you.
> >>
> >>
> >
>
********************************************************************************
> >
> >
> >> _______________________________________________
> >> SunRay-Users mailing list
> >> [email protected]
> >> http://www.filibeto.org/mailman/listinfo/sunray-users
> >>
> >>
> >
> > _______________________________________________
> > SunRay-Users mailing list
> > [email protected]
> > http://www.filibeto.org/mailman/listinfo/sunray-users
> >
> >
***************************************************************************
> > IMPORTANT NOTICE:
> > This email and any files transmitted with it is intended only for
> > the use of the person(s) to whom it is addressed, and may
> > contain information that is privileged, confidential and exempt
> > from disclosure under applicable law. If you are not the intended
> > recipient, please immediately notify the sender and delete
> > the email. Thank you.
> >
***************************************************************************
> >
> >
> >
> >
> >
> >
> >
>
********************************************************************************
> >
> > IMPORTANT NOTICE: This email and any files transmitted with it is
> > intended only for the use of the person(s) to whom it is addressed,
and
> > may contain information that is privileged, confidential and exempt
from
> > disclosure under applicable law. If you are not the intended recipient,
> > please immediately notify the sender and delete the email. Thank you.
> >
>
********************************************************************************
> >
> > _______________________________________________
> > SunRay-Users mailing list
> > [email protected]
> > http://www.filibeto.org/mailman/listinfo/sunray-users
> >
>
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
>
***************************************************************************
> IMPORTANT NOTICE:
> This email and any files transmitted with it is intended only for
> the use of the person(s) to whom it is addressed, and may
> contain information that is privileged, confidential and exempt
> from disclosure under applicable law. If you are not the intended
> recipient, please immediately notify the sender and delete
> the email. Thank you.
>
***************************************************************************
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
