Make sure issue DTU reading the .parms from the Sun Ray server
where utfwadm -A -e 00144fe4b512 -F -V has been run.
Thanks
P.S.M.Swamiji
Note:These are my personal opinions, nothing to do with my employer
David Koelmeyer wrote:
Hi P.S.M.Swamiji,
Thanks for your reply, I entered this and no joy as yet:
$ utfwadm -A -e 00144fe4b512 -F -V
CoronaP1 4.0_127553-03_2008.05.14.13.48
CoronaP2 4.0_127553-03_2008.05.14.13.48
CoronaP3 4.0_127553-03_2008.05.14.13.48
CoronaP4 4.0_127553-03_2008.05.14.13.48
CoronaP5 4.0_127553-03_2008.05.14.13.48
CoronaP6 4.0_127553-03_2008.05.14.13.48
CoronaP7 4.0_127553-03_2008.05.14.13.48
SunRayP8 4.0_127553-03_2008.05.14.13.48
After recyling power to the DTU in question:
$ utfwload -a
4.0 utku1 xxx.xxx.xxx.xxx P8.00144fe4b512 4.1_44_2008.08.12.16.39
( Other DTUs list as:
2.0 utku0 xxx.xxx.xxx.xxx P7.0003babba390
GUI4.0_127553-03_2008.05.14.13.48
3.0 utku3 xxx.xxx.xxx.xxx P8.00144fd183b9
GUI4.0_127553-03_2008.05.14.13.48 )
Am I missing a step somehow?
Cheers,
Dave
________________________________________
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of P.S.M.Swamiji [EMAIL
PROTECTED]
Sent: Monday, 22 September 2008 3:03 p.m.
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] Downgrading Firmware DTU and barrier level
questions
David Koelmeyer wrote:
Hi Kent,
Thanks - I enter this command and the output is as follows:
$ utfwadm -A -e 00144FE4B512 -F
Error: cannot create macro "00144FE4B512":
Error: cannot create macro "0100144FE4B512": Warning: No DHCP configuration
file exists.
There is no way to verify the data store version for this operation. dhtadm:
null is not a valid resource.
My SunRay server is not the SunRay DHCP server...is it possible to force a
firmware downgrade
in my scenario?
Yes. Try utfwadm -A -e 00144FE4B512 -F -V.
Thanks
P.S.M.Swamiji
Note:These are my personal opinions, nothing to do with my employer
Cheers,
Dave
________________________________________
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Kent Peacock [EMAIL
PROTECTED]
Sent: Monday, 22 September 2008 12:18 p.m.
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] Downgrading Firmware DTU and barrier level
questions
On 09/21/08 17:06, David Koelmeyer wrote:
I've run utfwadm -A -a -V -f /opt/SUNWut/lib/firmware_gui followed by
utfwload -L, and this has updated my other SunRays to
GUI4.0_127553-03_2008.05.14.13.48 version firmware just
fine.
Use the -F option on utfwadm to force the barrier level.
Kent
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
