On 05/19/11 03:59 PM, Kalle Anka wrote:
Hmmm... When I tried to get static IP, I also tried "ipadm" because it seemed
simpler. Maybe that messed my server up?
root@Frasse:~# ipadm show-if
IFNAME STATE CURRENT PERSISTENT
lo0 ok -m-v------46 ---
e1000g0 ok bm--------46 ---
root@Frasse:~# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
e1000g0/_b dhcp ok 192.168.1.4/24
lo0/v6 static ok ::1/128
e1000g0/_a addrconf ok fe80::21b:21ff:fe1e:2ed0/10
Look, I have two e1000g0 entries. Maybe it confuses the computer? How can I get
rid of one?
I don't know ipadm. But I can tell from your ifconfig output that you're
configuration is correct for what you need to ping your router.
So it's not a server configuration problem.
You have an IPv4 entry and an IPv6 entry. That's normal.
-Bob
The weird thing is that I tried "ipadm" in another experimental BE, but it seems
that "ipadm" carries over to every BE - it seems to be global. Is it true?
----- Original Message ----
From: Bob Doolittle<[email protected]>
To: SunRay-Users mailing list<[email protected]>
Cc: Kalle Anka<[email protected]>
Sent: Thu, May 19, 2011 4:54:18 PM
Subject: Re: [SunRay-Users] Fw: Install instructions of v5.2 for S11E?
Your configuration looks fine to me.
You just need your hostname/IP in /etc/hosts and /etc/hostname.INTERFACE. You'll
need to update /etc/netmasks for your network/mask.
That's it [1]. You're have configured a static IP address and should be able to
ping IP addresses on your local subnet, yet the ping is not working.
You can verify your configuration by observing that ifconfig is reporting
correct information regarding your IP address, netmask, and broadcast address,
and it's "UP", so you've correctly configured a static IP. The fact that it's
also "RUNNING" means your network is connected to *something*.
But you can't ping your router. That's not a machine configuration problem,
that's a network wiring problem, or possibly a firewall blocking traffic between
your host and your router, or some other router configuration issue. I don't
think your problem is with your server at this point.
-Bob
[1] you also need to setup a name service such as DNS, but that won't affect
ping of an IP address, and you may need to put the IP address of your router in
/etc/defaultrouter if your router doesn't support auto discovery, but that won't
affect ping of anything on your local subnet, such as the router itself. So
don't worry about either of these things until you can successfully ping your
router's IP address.
On 05/19/11 10:03 AM, Kalle Anka wrote:
Ok, let's start from the beginning. Does someone know how to get a static IP
on
S11E? Are there a link anywhere?
When I get everything working, I will post install instructions here. I will
do
the hard work and post them, so we can update the wiki. The community takes
care
of this.
----- Forwarded Message ----
From: Kalle Anka<[email protected]>
To: [email protected]
Sent: Wed, May 18, 2011 7:05:23 PM
Subject: Fw: Install instructions of v5.2 for S11E?
Bob, I now tried to setup /etc/resolv.conf on a fresh install of S11E, but
still
it dont work to get static ip.
I added "dns" at the end:
nsswitch.conf
...
hosts: files dns
...
I added the last line:
resolv.conf
nameserver 192.168.1.1
domain 195.54.122.200
Upon reboot, I can not ping 192.168.1.1. But I can ping 127.0.0.1. So how do I
setup an /etc/resolv.conf file?
Too bad that the SRS install instructions on the wiki doesn't work
http://wiki.sun-rays.org/index.php/SRS_5.1_on_Solaris_11_Express
When I get this working, I will post a how to how to install SRS v5.2 on a
fresh
S11E. Hopefully someone can update the install instructions.
------------------------
It sounds as though you did not set up your /etc/resolv.conf DNS control file?
Can you do "ping 192.168.1.1"? That would verify whether your network
connection
itself is working. -Bob
----- Forwarded Message ----
From: Kalle Anka<[email protected]>
To: [email protected]
Sent: Wed, May 18, 2011 12:29:33 AM
Subject: Fw: Install instructions of v5.2 for S11E?
Ok, to install v5.2, Ive tried to first get static IP but did not succeed. I
did
these steps on my fresh installation of S11E:
/etc/hosts
127.0.0.1 localhost loghost
192.168.1.3 Frasse
/etc/hostname.e1000g0
Frasse netmask + broadcast +
/etc/netmasks
192.168.1.0 255.255.255.0
/etc/defaultrouter
192.168.1.1
# cp /etc/nsswitch.dns /etc/nsswitch.conf
# svcadm disable network/physical:nwam
# svcadm enable network/physical:default
Then I rebooted and I have no internet connection. Look:
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ---------- ---------
default 192.168.1.1 UG 1 0
127.0.0.1 127.0.0.1 UH 2 4 lo0
192.168.1.0 192.168.1.3 U 2 0 e1000g0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref Use If
--------------------------- --------------------------- ----- --- -------
-----
::1 ::1 UH 2 0 lo0
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index
1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255
ether 0:1b:21:1e:2e:d0
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index
1
inet6 ::1/128
# ping www.google.com
ping: unknown host www.google.com
# getent hosts Frasse
192.168.1.3 Frasse
What can be the problem?
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
