Hmmm... When I tried to get static IP, I also tried "ipadm" because it seemed simpler. Maybe that messed my server up?
root@Frasse:~# ipadm show-if IFNAME STATE CURRENT PERSISTENT lo0 ok -m-v------46 --- e1000g0 ok bm--------46 --- root@Frasse:~# ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 e1000g0/_b dhcp ok 192.168.1.4/24 lo0/v6 static ok ::1/128 e1000g0/_a addrconf ok fe80::21b:21ff:fe1e:2ed0/10 Look, I have two e1000g0 entries. Maybe it confuses the computer? How can I get rid of one? The weird thing is that I tried "ipadm" in another experimental BE, but it seems that "ipadm" carries over to every BE - it seems to be global. Is it true? ----- Original Message ---- From: Bob Doolittle <[email protected]> To: SunRay-Users mailing list <[email protected]> Cc: Kalle Anka <[email protected]> Sent: Thu, May 19, 2011 4:54:18 PM Subject: Re: [SunRay-Users] Fw: Install instructions of v5.2 for S11E? Your configuration looks fine to me. You just need your hostname/IP in /etc/hosts and /etc/hostname.INTERFACE. You'll need to update /etc/netmasks for your network/mask. That's it [1]. You're have configured a static IP address and should be able to ping IP addresses on your local subnet, yet the ping is not working. You can verify your configuration by observing that ifconfig is reporting correct information regarding your IP address, netmask, and broadcast address, and it's "UP", so you've correctly configured a static IP. The fact that it's also "RUNNING" means your network is connected to *something*. But you can't ping your router. That's not a machine configuration problem, that's a network wiring problem, or possibly a firewall blocking traffic between your host and your router, or some other router configuration issue. I don't think your problem is with your server at this point. -Bob [1] you also need to setup a name service such as DNS, but that won't affect ping of an IP address, and you may need to put the IP address of your router in /etc/defaultrouter if your router doesn't support auto discovery, but that won't affect ping of anything on your local subnet, such as the router itself. So don't worry about either of these things until you can successfully ping your router's IP address. On 05/19/11 10:03 AM, Kalle Anka wrote: > Ok, let's start from the beginning. Does someone know how to get a static IP on > S11E? Are there a link anywhere? > > When I get everything working, I will post install instructions here. I will do > the hard work and post them, so we can update the wiki. The community takes >care > of this. > > > > > ----- Forwarded Message ---- > From: Kalle Anka<[email protected]> > To: [email protected] > Sent: Wed, May 18, 2011 7:05:23 PM > Subject: Fw: Install instructions of v5.2 for S11E? > > Bob, I now tried to setup /etc/resolv.conf on a fresh install of S11E, but >still > > > it dont work to get static ip. > > > > I added "dns" at the end: > nsswitch.conf > ... > hosts: files dns > ... > > > I added the last line: > resolv.conf > nameserver 192.168.1.1 > domain 195.54.122.200 > > > > Upon reboot, I can not ping 192.168.1.1. But I can ping 127.0.0.1. So how do I > setup an /etc/resolv.conf file? > > > Too bad that the SRS install instructions on the wiki doesn't work > http://wiki.sun-rays.org/index.php/SRS_5.1_on_Solaris_11_Express > When I get this working, I will post a how to how to install SRS v5.2 on a >fresh > S11E. Hopefully someone can update the install instructions. > > ------------------------ > > It sounds as though you did not set up your /etc/resolv.conf DNS control file? > Can you do "ping 192.168.1.1"? That would verify whether your network >connection > > itself is working. -Bob > > > ----- Forwarded Message ---- > From: Kalle Anka<[email protected]> > To: [email protected] > Sent: Wed, May 18, 2011 12:29:33 AM > Subject: Fw: Install instructions of v5.2 for S11E? > > Ok, to install v5.2, Ive tried to first get static IP but did not succeed. I >did > > > these steps on my fresh installation of S11E: > > > /etc/hosts > 127.0.0.1 localhost loghost > 192.168.1.3 Frasse > > > /etc/hostname.e1000g0 > Frasse netmask + broadcast + > > > /etc/netmasks > 192.168.1.0 255.255.255.0 > > > /etc/defaultrouter > 192.168.1.1 > > > # cp /etc/nsswitch.dns /etc/nsswitch.conf > # svcadm disable network/physical:nwam > # svcadm enable network/physical:default > > > > > > > Then I rebooted and I have no internet connection. Look: > # netstat -rn > Routing Table: IPv4 > Destination Gateway Flags Ref Use Interface > -------------------- -------------------- ----- ----- ---------- --------- > default 192.168.1.1 UG 1 0 > 127.0.0.1 127.0.0.1 UH 2 4 lo0 > 192.168.1.0 192.168.1.3 U 2 0 e1000g0 > > Routing Table: IPv6 > Destination/Mask Gateway Flags Ref Use If > --------------------------- --------------------------- ----- --- ------- ----- > ::1 ::1 UH 2 0 lo0 > > # ifconfig -a > lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 >index > > > 1 > inet 127.0.0.1 netmask ff000000 > e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 > ether 0:1b:21:1e:2e:d0 > lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 >index > > > 1 > inet6 ::1/128 > > # ping www.google.com > ping: unknown host www.google.com > > # getent hosts Frasse > 192.168.1.3 Frasse > > > What can be the problem? > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
