Yes, I'm on 8.2.13, yours is 8.0.9.2. But the "immediate"-key was added long time ago. Here's the current listing of parsedit.php<http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/parsedit.php>. Check if your file is complete - would be interesting to look at it.
Also, you could try to back up you old file and use the new one. It doesn't actually change the parameters. It's ok. Oleg On 5 October 2012 16:34, Linden Mills-Connery <[email protected]> wrote: > Very odd, do we have different firmware? > > Without immediate I get the GUI for changing elements, see attached. It > doesn't actually change the parameters. > > Linden > > > On Fri, Oct 5, 2012 at 4:27 PM, Oleg <[email protected]>wrote: > >> I tried your request and it worked. >> >> What do you get without "immediate"? >>> >>> >>> http://10.23.33.10/parsedit.php?AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >> >> >> Oleg >> >> On 5 October 2012 16:21, Linden Mills-Connery <[email protected]> wrote: >> >>> I have tried this HTTP request in a browser at get an error in the >>> returned XML: >>> >>> http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>> >>> Error: "Wrong address==0, probably misspelled constant: 'immediate'" >>> >>> I get the same error even if I call: >>> http://10.23.33.10/parsedit.php?immediate >>> >>> Not sure what I am missing? >>> >>> Linden >>> >>> >>> On Fri, Oct 5, 2012 at 2:36 PM, Oleg <[email protected]>wrote: >>> >>>> There's a part of the file missing. >>>> >>>> Most likely it is caused by not syncing the camera file system after >>>> editing that file and rebooting the camera. >>>> >>>> The safest way to sync this file is to save it through >>>> >>>>> 192.168.0.9 -> Parameter Editor >>>> >>>> >>>> Or (in case of editing other files) this can be done from the telnet >>>> session with a command "sync". >>>> >>>> Also, you can change parameters with a http request in the following >>>> way: >>>> >>>>> >>>>> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >>>>> .. >>>> >>>> >>>> Best regards, >>>> Oleg Dzhimiev >>>> Electronics Engineer >>>> phone: +1 801 783 5555 x124 >>>> Elphel, Inc. >>>> >>>> On 5 October 2012 14:18, Linden Mills-Connery <[email protected]>wrote: >>>> >>>>> Thanks, that fixed it. Find the bad XML attached. >>>>> >>>>> Linden >>>>> >>>>> >>>>> On Fri, Oct 5, 2012 at 1:30 PM, Oleg >>>>> <[email protected]>wrote: >>>>> >>>>>> Linden, >>>>>> >>>>>> 1. Could you please send the current /etc/autocampars.xml? >>>>>> 2. Meanwhile, you can rename the current file and regenerate the >>>>>> dafault one: >>>>>> >>>>>>> php autocampars.php --init >>>>>> >>>>>> It should create a new /etc/autocampars.xml if it doesn't exist. You >>>>>> might need to reboot the camera afterwards for a cleaner effect. >>>>>> The same thing will happen if you just reboot w/o this file in place. >>>>>> >>>>>> On 5 October 2012 12:56, Linden Mills-Connery <[email protected]>wrote: >>>>>> >>>>>>> I am not sure what triggered the issue as I was not operating the >>>>>>> camera. But yes I change several parameters between getting the camera >>>>>>> set-up and putting it in line-scan (recording) mode. I am >>>>>>> curious what would be the recommended way of changing parameters with >>>>>>> HTTP >>>>>>> requests. Currently I am emulating the HTTP request made by >>>>>>> autocampars.php >>>>>>> to change parameters. >>>>>>> >>>>>>> Output of that call: >>>>>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>>>>> X-Powered-By: PHP/5.2.9 >>>>>>> Content-type: text/html >>>>>>> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>> ure end of data in tag >>>>>>> GAINR >>>>>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>>>>> n line <b>954</b><br >>>>>>> /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> ABLE >>>>>>> is enabled this overall gain is split bet >>>>>>> ween the sensor analog gain and >>>>>>> di >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> >>>>>>> >>>>>>> ^ >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>> ure end of data in tag >>>>>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>>>>> p</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> ABLE >>>>>>> is enabled this overall gain is split bet >>>>>>> ween the sensor analog gain and >>>>>>> di >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> >>>>>>> >>>>>>> ^ >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>> ure end of data in tag >>>>>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>>>>> /b> on line >>>>>>> <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> ABLE >>>>>>> is enabled this overall gain is split bet >>>>>>> ween the sensor analog gain and >>>>>>> di >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>> href='function.simplexml-load-file'>f >>>>>>> unction.simplexml-load-file</a>]: >>>>>>> >>>>>>> >>>>>>> ^ >>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>> line <b>954</b><br /> >>>>>>> <br /> >>>>>>> <b>Fatal error</b>: Call to a member function children() on a >>>>>>> non-object in <b> >>>>>>> /mnt/flash/html/autocampars.php</b> on line >>>>>>> <b>958</b><br /> >>>>>>> >>>>>>> Is this as simple as re-flashing the original /etc/autocampars.xml >>>>>>> file? >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Linden >>>>>>> >>>>>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> ** >>>>>>>> Hello Linden, >>>>>>>> >>>>>>>> How did camera stop working did you modify (and save any >>>>>>>> parameters)? >>>>>>>> It seems the camera could not finish initialization >>>>>>>> /usr/local/html/autocampars.php --init >>>>>>>> It may be caused by /etc/autocampars.xml parameters >>>>>>>> You may try "/usr/local/html/autocampars.php --init" manually and >>>>>>>> see what it will output. >>>>>>>> >>>>>>>> Andrey >>>>>>>> >>>>>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery < >>>>>>>> [email protected]>* wrote ---- >>>>>>>> >>>>>>>> Having a problem with the camera sensor no longer recording any >>>>>>>> images. I can access the cameras web interface fine but any images are >>>>>>>> all >>>>>>>> the blank 1x1 frames. >>>>>>>> >>>>>>>> I have attached the system report hoping that this will shed some >>>>>>>> light on the issue. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Linden >>>>>>>> _______________________________________________ >>>>>>>> Support-list mailing list >>>>>>>> [email protected] >>>>>>>> >>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Support-list mailing list >>>>>>> [email protected] >>>>>>> >>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Best regards, >>>>>> Oleg Dzhimiev >>>>>> Electronics Engineer >>>>>> phone: +1 801 783 5555 x124 >>>>>> Elphel, Inc. >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Support-list mailing list >>>>> [email protected] >>>>> >>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>> >>>> >>> >>> _______________________________________________ >>> Support-list mailing list >>> [email protected] >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >> > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > -- Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
