Unfotunately we haven't updated our wiki page<http://wiki.elphel.com/index.php?title=Release_notes>for quite a while. You can track some commits at http://www3.elphel.com/aggregator/sources/2?page=1 and on the sf.net<http://sourceforge.net/projects/elphel/> .
Some of the changes are related to: * GPS/IMU event logger * UDMA * recorder program * new sensor's temperature reading (new parameters) Best regards, Oleg On 5 October 2012 17:33, Linden Mills-Connery <[email protected]> wrote: > Were can I find release notes for the new version? > > Linden > On Oct 5, 2012 5:21 PM, "Oleg" <[email protected]> wrote: > >> You shouldn't be too worried but it would be better to update the >> software) >> >> We don't have the latest image on sf.net - I uploaded it to >> http://community.elphel.com/files/8.2.13/ >> Then if you're on linux you can set up nfs server and run update from the >> camera: 192.168.0.9 -> System Preferences -> Firmware. >> If not - you could boot from our live usb >> (kubuntu-elphel-4.iso<http://community.elphel.com/files/live-dvd/>) >> and update from there. >> >> Best regards, >> Oleg >> >> On 5 October 2012 16:59, Linden Mills-Connery <[email protected]> wrote: >> >>> Yup, I'm on an old parsedit. See attached. Will try out the new one >>> later today/tomorrow. >>> >>> Should I be worried that my firmware is only partly up to date? Perhaps >>> I should run an update again? What are your thoughts? >>> >>> Thanks for the help? >>> >>> Linden >>> >>> >>> On Fri, Oct 5, 2012 at 4:51 PM, Oleg <[email protected]>wrote: >>> >>>> Yes, I'm on 8.2.13, yours is 8.0.9.2. But the "immediate"-key was added >>>> long time ago. >>>> Here's the current listing of >>>> parsedit.php<http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/parsedit.php>. >>>> Check >>>> if your file is complete - would be interesting to look at it. >>>> >>>> Also, you could try to back up you old file and use the new one. >>>> >>>> It doesn't actually change the parameters. >>>> >>>> It's ok. >>>> >>>> Oleg >>>> >>>> >>>> On 5 October 2012 16:34, Linden Mills-Connery <[email protected]>wrote: >>>> >>>>> Very odd, do we have different firmware? >>>>> >>>>> Without immediate I get the GUI for changing elements, see attached. >>>>> It doesn't actually change the parameters. >>>>> >>>>> Linden >>>>> >>>>> >>>>> On Fri, Oct 5, 2012 at 4:27 PM, Oleg >>>>> <[email protected]>wrote: >>>>> >>>>>> I tried your request and it worked. >>>>>> >>>>>> What do you get without "immediate"? >>>>>>> >>>>>>> >>>>>>> http://10.23.33.10/parsedit.php?AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>>> >>>>>> >>>>>> Oleg >>>>>> >>>>>> On 5 October 2012 16:21, Linden Mills-Connery <[email protected]>wrote: >>>>>> >>>>>>> I have tried this HTTP request in a browser at get an error in the >>>>>>> returned XML: >>>>>>> >>>>>>> http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>>>> >>>>>>> Error: "Wrong address==0, probably misspelled constant: 'immediate'" >>>>>>> >>>>>>> I get the same error even if I call: >>>>>>> http://10.23.33.10/parsedit.php?immediate >>>>>>> >>>>>>> Not sure what I am missing? >>>>>>> >>>>>>> Linden >>>>>>> >>>>>>> >>>>>>> On Fri, Oct 5, 2012 at 2:36 PM, Oleg < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> There's a part of the file missing. >>>>>>>> >>>>>>>> Most likely it is caused by not syncing the camera file system >>>>>>>> after editing that file and rebooting the camera. >>>>>>>> >>>>>>>> The safest way to sync this file is to save it through >>>>>>>> >>>>>>>>> 192.168.0.9 -> Parameter Editor >>>>>>>> >>>>>>>> >>>>>>>> Or (in case of editing other files) this can be done from the >>>>>>>> telnet session with a command "sync". >>>>>>>> >>>>>>>> Also, you can change parameters with a http request in the >>>>>>>> following way: >>>>>>>> >>>>>>>>> >>>>>>>>> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >>>>>>>>> .. >>>>>>>> >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Oleg Dzhimiev >>>>>>>> Electronics Engineer >>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>> Elphel, Inc. >>>>>>>> >>>>>>>> On 5 October 2012 14:18, Linden Mills-Connery <[email protected]>wrote: >>>>>>>> >>>>>>>>> Thanks, that fixed it. Find the bad XML attached. >>>>>>>>> >>>>>>>>> Linden >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, Oct 5, 2012 at 1:30 PM, Oleg < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Linden, >>>>>>>>>> >>>>>>>>>> 1. Could you please send the current /etc/autocampars.xml? >>>>>>>>>> 2. Meanwhile, you can rename the current file and regenerate the >>>>>>>>>> dafault one: >>>>>>>>>> >>>>>>>>>>> php autocampars.php --init >>>>>>>>>> >>>>>>>>>> It should create a new /etc/autocampars.xml if it doesn't >>>>>>>>>> exist. You might need to reboot the camera afterwards for a cleaner >>>>>>>>>> effect. >>>>>>>>>> The same thing will happen if you just reboot w/o this file in >>>>>>>>>> place. >>>>>>>>>> >>>>>>>>>> On 5 October 2012 12:56, Linden Mills-Connery >>>>>>>>>> <[email protected]>wrote: >>>>>>>>>> >>>>>>>>>>> I am not sure what triggered the issue as I was not operating >>>>>>>>>>> the camera. But yes I change several parameters between getting the >>>>>>>>>>> camera >>>>>>>>>>> set-up and putting it in line-scan (recording) mode. I am >>>>>>>>>>> curious what would be the recommended way of changing parameters >>>>>>>>>>> with HTTP >>>>>>>>>>> requests. Currently I am emulating the HTTP request made by >>>>>>>>>>> autocampars.php >>>>>>>>>>> to change parameters. >>>>>>>>>>> >>>>>>>>>>> Output of that call: >>>>>>>>>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>>>>>>>>> X-Powered-By: PHP/5.2.9 >>>>>>>>>>> Content-type: text/html >>>>>>>>>>> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>> ure end of data in >>>>>>>>>>> tag GAINR >>>>>>>>>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>>>>>>>>> n line >>>>>>>>>>> <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>> ween the sensor analog gain >>>>>>>>>>> and di >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ^ >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>> ure end of data in tag >>>>>>>>>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>>>>>>>>> >>>>>>>>>>> p</b> >>>>>>>>>>> on line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>> ween the sensor analog gain >>>>>>>>>>> and di >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ^ >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>> ure end of data in tag >>>>>>>>>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>>>>>>>>> /b> on line >>>>>>>>>>> <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>> ween the sensor analog gain >>>>>>>>>>> and di >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>> >>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> ^ >>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>> <br /> >>>>>>>>>>> <b>Fatal error</b>: Call to a member function children() on a >>>>>>>>>>> non-object in <b> >>>>>>>>>>> /mnt/flash/html/autocampars.php</b> on line >>>>>>>>>>> <b>958</b><br /> >>>>>>>>>>> >>>>>>>>>>> Is this as simple as re-flashing the >>>>>>>>>>> original /etc/autocampars.xml file? >>>>>>>>>>> >>>>>>>>>>> Thanks, >>>>>>>>>>> >>>>>>>>>>> Linden >>>>>>>>>>> >>>>>>>>>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> ** >>>>>>>>>>>> Hello Linden, >>>>>>>>>>>> >>>>>>>>>>>> How did camera stop working did you modify (and save any >>>>>>>>>>>> parameters)? >>>>>>>>>>>> It seems the camera could not finish initialization >>>>>>>>>>>> /usr/local/html/autocampars.php --init >>>>>>>>>>>> It may be caused by /etc/autocampars.xml parameters >>>>>>>>>>>> You may try "/usr/local/html/autocampars.php --init" manually >>>>>>>>>>>> and see what it will output. >>>>>>>>>>>> >>>>>>>>>>>> Andrey >>>>>>>>>>>> >>>>>>>>>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery < >>>>>>>>>>>> [email protected]>* wrote ---- >>>>>>>>>>>> >>>>>>>>>>>> Having a problem with the camera sensor no longer recording any >>>>>>>>>>>> images. I can access the cameras web interface fine but any images >>>>>>>>>>>> are all >>>>>>>>>>>> the blank 1x1 frames. >>>>>>>>>>>> >>>>>>>>>>>> I have attached the system report hoping that this will shed >>>>>>>>>>>> some light on the issue. >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> Linden >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Support-list mailing list >>>>>>>>>>>> [email protected] >>>>>>>>>>>> >>>>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Support-list mailing list >>>>>>>>>>> [email protected] >>>>>>>>>>> >>>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Best regards, >>>>>>>>>> Oleg Dzhimiev >>>>>>>>>> Electronics Engineer >>>>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>>>> Elphel, Inc. >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Support-list mailing list >>>>>>>>> [email protected] >>>>>>>>> >>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Support-list mailing list >>>>>>> [email protected] >>>>>>> >>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Support-list mailing list >>>>> [email protected] >>>>> >>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>> >>>>> >>>> >>>> >>>> -- >>>> Best regards, >>>> Oleg Dzhimiev >>>> Electronics Engineer >>>> phone: +1 801 783 5555 x124 >>>> Elphel, Inc. >>>> >>> >>> >>> _______________________________________________ >>> Support-list mailing list >>> [email protected] >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >> >> >> -- >> Best regards, >> Oleg Dzhimiev >> Electronics Engineer >> phone: +1 801 783 5555 x124 >> Elphel, Inc. >> > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > -- Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
