Hi Linden, Did you end up reflashing the camera software or just copied the newer parsedit.php?
Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc. On 5 October 2012 17:59, Oleg <[email protected]> wrote: > Unfotunately we haven't updated our wiki > page<http://wiki.elphel.com/index.php?title=Release_notes>for quite a while. > You can track some commits at > http://www3.elphel.com/aggregator/sources/2?page=1 and on the > sf.net<http://sourceforge.net/projects/elphel/> > . > > Some of the changes are related to: > * GPS/IMU event logger > * UDMA > * recorder program > * new sensor's temperature reading (new parameters) > > Best regards, > Oleg > > On 5 October 2012 17:33, Linden Mills-Connery <[email protected]> wrote: > >> Were can I find release notes for the new version? >> >> Linden >> On Oct 5, 2012 5:21 PM, "Oleg" <[email protected]> wrote: >> >>> You shouldn't be too worried but it would be better to update the >>> software) >>> >>> We don't have the latest image on sf.net - I uploaded it to >>> http://community.elphel.com/files/8.2.13/ >>> Then if you're on linux you can set up nfs server and run update from >>> the camera: 192.168.0.9 -> System Preferences -> Firmware. >>> If not - you could boot from our live usb >>> (kubuntu-elphel-4.iso<http://community.elphel.com/files/live-dvd/>) >>> and update from there. >>> >>> Best regards, >>> Oleg >>> >>> On 5 October 2012 16:59, Linden Mills-Connery <[email protected]> wrote: >>> >>>> Yup, I'm on an old parsedit. See attached. Will try out the new one >>>> later today/tomorrow. >>>> >>>> Should I be worried that my firmware is only partly up to date? Perhaps >>>> I should run an update again? What are your thoughts? >>>> >>>> Thanks for the help? >>>> >>>> Linden >>>> >>>> >>>> On Fri, Oct 5, 2012 at 4:51 PM, Oleg >>>> <[email protected]>wrote: >>>> >>>>> Yes, I'm on 8.2.13, yours is 8.0.9.2. But the "immediate"-key was >>>>> added long time ago. >>>>> Here's the current listing of >>>>> parsedit.php<http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/parsedit.php>. >>>>> Check >>>>> if your file is complete - would be interesting to look at it. >>>>> >>>>> Also, you could try to back up you old file and use the new one. >>>>> >>>>> It doesn't actually change the parameters. >>>>> >>>>> It's ok. >>>>> >>>>> Oleg >>>>> >>>>> >>>>> On 5 October 2012 16:34, Linden Mills-Connery <[email protected]>wrote: >>>>> >>>>>> Very odd, do we have different firmware? >>>>>> >>>>>> Without immediate I get the GUI for changing elements, see attached. >>>>>> It doesn't actually change the parameters. >>>>>> >>>>>> Linden >>>>>> >>>>>> >>>>>> On Fri, Oct 5, 2012 at 4:27 PM, Oleg <[email protected] >>>>>> > wrote: >>>>>> >>>>>>> I tried your request and it worked. >>>>>>> >>>>>>> What do you get without "immediate"? >>>>>>>> >>>>>>>> >>>>>>>> http://10.23.33.10/parsedit.php?AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>>>> >>>>>>> >>>>>>> Oleg >>>>>>> >>>>>>> On 5 October 2012 16:21, Linden Mills-Connery <[email protected]>wrote: >>>>>>> >>>>>>>> I have tried this HTTP request in a browser at get an error in the >>>>>>>> returned XML: >>>>>>>> >>>>>>>> http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>>>>> >>>>>>>> Error: "Wrong address==0, probably misspelled constant: >>>>>>>> 'immediate'" >>>>>>>> >>>>>>>> I get the same error even if I call: >>>>>>>> http://10.23.33.10/parsedit.php?immediate >>>>>>>> >>>>>>>> Not sure what I am missing? >>>>>>>> >>>>>>>> Linden >>>>>>>> >>>>>>>> >>>>>>>> On Fri, Oct 5, 2012 at 2:36 PM, Oleg < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> There's a part of the file missing. >>>>>>>>> >>>>>>>>> Most likely it is caused by not syncing the camera file system >>>>>>>>> after editing that file and rebooting the camera. >>>>>>>>> >>>>>>>>> The safest way to sync this file is to save it through >>>>>>>>> >>>>>>>>>> 192.168.0.9 -> Parameter Editor >>>>>>>>> >>>>>>>>> >>>>>>>>> Or (in case of editing other files) this can be done from the >>>>>>>>> telnet session with a command "sync". >>>>>>>>> >>>>>>>>> Also, you can change parameters with a http request in the >>>>>>>>> following way: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >>>>>>>>>> .. >>>>>>>>> >>>>>>>>> >>>>>>>>> Best regards, >>>>>>>>> Oleg Dzhimiev >>>>>>>>> Electronics Engineer >>>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>>> Elphel, Inc. >>>>>>>>> >>>>>>>>> On 5 October 2012 14:18, Linden Mills-Connery >>>>>>>>> <[email protected]>wrote: >>>>>>>>> >>>>>>>>>> Thanks, that fixed it. Find the bad XML attached. >>>>>>>>>> >>>>>>>>>> Linden >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Fri, Oct 5, 2012 at 1:30 PM, Oleg < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> Linden, >>>>>>>>>>> >>>>>>>>>>> 1. Could you please send the current /etc/autocampars.xml? >>>>>>>>>>> 2. Meanwhile, you can rename the current file and regenerate the >>>>>>>>>>> dafault one: >>>>>>>>>>> >>>>>>>>>>>> php autocampars.php --init >>>>>>>>>>> >>>>>>>>>>> It should create a new /etc/autocampars.xml if it doesn't >>>>>>>>>>> exist. You might need to reboot the camera afterwards for a cleaner >>>>>>>>>>> effect. >>>>>>>>>>> The same thing will happen if you just reboot w/o this file in >>>>>>>>>>> place. >>>>>>>>>>> >>>>>>>>>>> On 5 October 2012 12:56, Linden Mills-Connery <[email protected] >>>>>>>>>>> > wrote: >>>>>>>>>>> >>>>>>>>>>>> I am not sure what triggered the issue as I was not operating >>>>>>>>>>>> the camera. But yes I change several parameters between getting >>>>>>>>>>>> the camera >>>>>>>>>>>> set-up and putting it in line-scan (recording) mode. I am >>>>>>>>>>>> curious what would be the recommended way of changing parameters >>>>>>>>>>>> with HTTP >>>>>>>>>>>> requests. Currently I am emulating the HTTP request made by >>>>>>>>>>>> autocampars.php >>>>>>>>>>>> to change parameters. >>>>>>>>>>>> >>>>>>>>>>>> Output of that call: >>>>>>>>>>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>>>>>>>>>> X-Powered-By: PHP/5.2.9 >>>>>>>>>>>> Content-type: text/html >>>>>>>>>>>> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>>> ure end of data in >>>>>>>>>>>> tag GAINR >>>>>>>>>>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>>>>>>>>>> n line >>>>>>>>>>>> <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>>> ween the sensor analog >>>>>>>>>>>> gain and di >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ^ >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>>> ure end of data in >>>>>>>>>>>> tag >>>>>>>>>>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>>>>>>>>>> >>>>>>>>>>>> p</b> >>>>>>>>>>>> on line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>>> ween the sensor analog >>>>>>>>>>>> gain and di >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ^ >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>>>>> ure end of data in >>>>>>>>>>>> tag >>>>>>>>>>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>>>>>>>>>> /b> on line >>>>>>>>>>>> <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: ABLE >>>>>>>>>>>> is enabled this overall gain is split bet >>>>>>>>>>>> ween the sensor analog >>>>>>>>>>>> gain and di >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>>>>> >>>>>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> ^ >>>>>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>>>>> line <b>954</b><br /> >>>>>>>>>>>> <br /> >>>>>>>>>>>> <b>Fatal error</b>: Call to a member function children() on a >>>>>>>>>>>> non-object in <b> >>>>>>>>>>>> /mnt/flash/html/autocampars.php</b> on line >>>>>>>>>>>> <b>958</b><br /> >>>>>>>>>>>> >>>>>>>>>>>> Is this as simple as re-flashing the >>>>>>>>>>>> original /etc/autocampars.xml file? >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> Linden >>>>>>>>>>>> >>>>>>>>>>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> ** >>>>>>>>>>>>> Hello Linden, >>>>>>>>>>>>> >>>>>>>>>>>>> How did camera stop working did you modify (and save any >>>>>>>>>>>>> parameters)? >>>>>>>>>>>>> It seems the camera could not finish initialization >>>>>>>>>>>>> /usr/local/html/autocampars.php --init >>>>>>>>>>>>> It may be caused by /etc/autocampars.xml parameters >>>>>>>>>>>>> You may try "/usr/local/html/autocampars.php --init" manually >>>>>>>>>>>>> and see what it will output. >>>>>>>>>>>>> >>>>>>>>>>>>> Andrey >>>>>>>>>>>>> >>>>>>>>>>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery >>>>>>>>>>>>> <[email protected]>* wrote ---- >>>>>>>>>>>>> >>>>>>>>>>>>> Having a problem with the camera sensor no longer recording >>>>>>>>>>>>> any images. I can access the cameras web interface fine but any >>>>>>>>>>>>> images are >>>>>>>>>>>>> all the blank 1x1 frames. >>>>>>>>>>>>> >>>>>>>>>>>>> I have attached the system report hoping that this will shed >>>>>>>>>>>>> some light on the issue. >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> >>>>>>>>>>>>> Linden >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Support-list mailing list >>>>>>>>>>>>> [email protected] >>>>>>>>>>>>> >>>>>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Support-list mailing list >>>>>>>>>>>> [email protected] >>>>>>>>>>>> >>>>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Best regards, >>>>>>>>>>> Oleg Dzhimiev >>>>>>>>>>> Electronics Engineer >>>>>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>>>>> Elphel, Inc. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Support-list mailing list >>>>>>>>>> [email protected] >>>>>>>>>> >>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Support-list mailing list >>>>>>>> [email protected] >>>>>>>> >>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Support-list mailing list >>>>>> [email protected] >>>>>> >>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Best regards, >>>>> Oleg Dzhimiev >>>>> Electronics Engineer >>>>> phone: +1 801 783 5555 x124 >>>>> Elphel, Inc. >>>>> >>>> >>>> >>>> _______________________________________________ >>>> Support-list mailing list >>>> [email protected] >>>> >>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.co<http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com> >>>> >>> _______________________________________________ >> Support-list mailing list >> [email protected] >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> >
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
