You shouldn't be too worried but it would be better to update the software)
We don't have the latest image on sf.net - I uploaded it to http://community.elphel.com/files/8.2.13/ Then if you're on linux you can set up nfs server and run update from the camera: 192.168.0.9 -> System Preferences -> Firmware. If not - you could boot from our live usb (kubuntu-elphel-4.iso<http://community.elphel.com/files/live-dvd/>) and update from there. Best regards, Oleg On 5 October 2012 16:59, Linden Mills-Connery <[email protected]> wrote: > Yup, I'm on an old parsedit. See attached. Will try out the new one later > today/tomorrow. > > Should I be worried that my firmware is only partly up to date? Perhaps I > should run an update again? What are your thoughts? > > Thanks for the help? > > Linden > > > On Fri, Oct 5, 2012 at 4:51 PM, Oleg <[email protected]>wrote: > >> Yes, I'm on 8.2.13, yours is 8.0.9.2. But the "immediate"-key was added >> long time ago. >> Here's the current listing of >> parsedit.php<http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/php_top/parsedit.php>. >> Check >> if your file is complete - would be interesting to look at it. >> >> Also, you could try to back up you old file and use the new one. >> >> It doesn't actually change the parameters. >> >> It's ok. >> >> Oleg >> >> >> On 5 October 2012 16:34, Linden Mills-Connery <[email protected]> wrote: >> >>> Very odd, do we have different firmware? >>> >>> Without immediate I get the GUI for changing elements, see attached. It >>> doesn't actually change the parameters. >>> >>> Linden >>> >>> >>> On Fri, Oct 5, 2012 at 4:27 PM, Oleg <[email protected]>wrote: >>> >>>> I tried your request and it worked. >>>> >>>> What do you get without "immediate"? >>>>> >>>>> >>>>> http://10.23.33.10/parsedit.php?AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>> >>>> >>>> Oleg >>>> >>>> On 5 October 2012 16:21, Linden Mills-Connery <[email protected]>wrote: >>>> >>>>> I have tried this HTTP request in a browser at get an error in the >>>>> returned XML: >>>>> >>>>> http://10.23.33.10/parsedit.php?immediate&AUTOEXP_ON=1&WB_EN=1&PF_HEIGHT=0&WOI_TOP=0&WOI_HEIGHT=1936 >>>>> >>>>> Error: "Wrong address==0, probably misspelled constant: 'immediate'" >>>>> >>>>> I get the same error even if I call: >>>>> http://10.23.33.10/parsedit.php?immediate >>>>> >>>>> Not sure what I am missing? >>>>> >>>>> Linden >>>>> >>>>> >>>>> On Fri, Oct 5, 2012 at 2:36 PM, Oleg >>>>> <[email protected]>wrote: >>>>> >>>>>> There's a part of the file missing. >>>>>> >>>>>> Most likely it is caused by not syncing the camera file system after >>>>>> editing that file and rebooting the camera. >>>>>> >>>>>> The safest way to sync this file is to save it through >>>>>> >>>>>>> 192.168.0.9 -> Parameter Editor >>>>>> >>>>>> >>>>>> Or (in case of editing other files) this can be done from the telnet >>>>>> session with a command "sync". >>>>>> >>>>>> Also, you can change parameters with a http request in the following >>>>>> way: >>>>>> >>>>>>> >>>>>>> http://192.168.0.9/parsedit.php?immediate&PARAMETER1=VALUE1&PARAMETER2=VALUE2. >>>>>>> .. >>>>>> >>>>>> >>>>>> Best regards, >>>>>> Oleg Dzhimiev >>>>>> Electronics Engineer >>>>>> phone: +1 801 783 5555 x124 >>>>>> Elphel, Inc. >>>>>> >>>>>> On 5 October 2012 14:18, Linden Mills-Connery <[email protected]>wrote: >>>>>> >>>>>>> Thanks, that fixed it. Find the bad XML attached. >>>>>>> >>>>>>> Linden >>>>>>> >>>>>>> >>>>>>> On Fri, Oct 5, 2012 at 1:30 PM, Oleg < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Linden, >>>>>>>> >>>>>>>> 1. Could you please send the current /etc/autocampars.xml? >>>>>>>> 2. Meanwhile, you can rename the current file and regenerate the >>>>>>>> dafault one: >>>>>>>> >>>>>>>>> php autocampars.php --init >>>>>>>> >>>>>>>> It should create a new /etc/autocampars.xml if it doesn't >>>>>>>> exist. You might need to reboot the camera afterwards for a cleaner >>>>>>>> effect. >>>>>>>> The same thing will happen if you just reboot w/o this file in >>>>>>>> place. >>>>>>>> >>>>>>>> On 5 October 2012 12:56, Linden Mills-Connery <[email protected]>wrote: >>>>>>>> >>>>>>>>> I am not sure what triggered the issue as I was not operating the >>>>>>>>> camera. But yes I change several parameters between getting the camera >>>>>>>>> set-up and putting it in line-scan (recording) mode. I am >>>>>>>>> curious what would be the recommended way of changing parameters with >>>>>>>>> HTTP >>>>>>>>> requests. Currently I am emulating the HTTP request made by >>>>>>>>> autocampars.php >>>>>>>>> to change parameters. >>>>>>>>> >>>>>>>>> Output of that call: >>>>>>>>> [root@Elphel353 /usr/html]788# php autocampars.php --init >>>>>>>>> X-Powered-By: PHP/5.2.9 >>>>>>>>> Content-type: text/html >>>>>>>>> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>> ure end of data in tag >>>>>>>>> GAINR >>>>>>>>> line 74 in <b>/mnt/flash/html/autocampars.php</b> o >>>>>>>>> n line >>>>>>>>> <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> ABLE >>>>>>>>> is enabled this overall gain is split bet >>>>>>>>> ween the sensor analog gain >>>>>>>>> and di >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> >>>>>>>>> >>>>>>>>> ^ >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>> ure end of data in tag >>>>>>>>> descriptions line 11 in <b>/mnt/flash/html/autocampars.ph >>>>>>>>> >>>>>>>>> p</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> ABLE >>>>>>>>> is enabled this overall gain is split bet >>>>>>>>> ween the sensor analog gain >>>>>>>>> and di >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> >>>>>>>>> >>>>>>>>> ^ >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> /etc/autocampars.xml:74: parser error : Premat >>>>>>>>> ure end of data in tag >>>>>>>>> autocampars line 3 in <b>/mnt/flash/html/autocampars.php< >>>>>>>>> /b> on line >>>>>>>>> <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> ABLE >>>>>>>>> is enabled this overall gain is split bet >>>>>>>>> ween the sensor analog gain >>>>>>>>> and di >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Warning</b>: simplexml_load_file() [<a >>>>>>>>> href='function.simplexml-load-file'>f >>>>>>>>> unction.simplexml-load-file</a>]: >>>>>>>>> >>>>>>>>> >>>>>>>>> ^ >>>>>>>>> in <b>/mnt/flash/html/autocampars.php</b> on >>>>>>>>> line <b>954</b><br /> >>>>>>>>> <br /> >>>>>>>>> <b>Fatal error</b>: Call to a member function children() on a >>>>>>>>> non-object in <b> >>>>>>>>> /mnt/flash/html/autocampars.php</b> on line >>>>>>>>> <b>958</b><br /> >>>>>>>>> >>>>>>>>> Is this as simple as re-flashing the >>>>>>>>> original /etc/autocampars.xml file? >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> >>>>>>>>> Linden >>>>>>>>> >>>>>>>>> On Fri, Oct 5, 2012 at 12:34 PM, support-list < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> ** >>>>>>>>>> Hello Linden, >>>>>>>>>> >>>>>>>>>> How did camera stop working did you modify (and save any >>>>>>>>>> parameters)? >>>>>>>>>> It seems the camera could not finish initialization >>>>>>>>>> /usr/local/html/autocampars.php --init >>>>>>>>>> It may be caused by /etc/autocampars.xml parameters >>>>>>>>>> You may try "/usr/local/html/autocampars.php --init" manually and >>>>>>>>>> see what it will output. >>>>>>>>>> >>>>>>>>>> Andrey >>>>>>>>>> >>>>>>>>>> ---- On Fri, 05 Oct 2012 11:09:00 -0700 *Linden Mills-Connery < >>>>>>>>>> [email protected]>* wrote ---- >>>>>>>>>> >>>>>>>>>> Having a problem with the camera sensor no longer recording any >>>>>>>>>> images. I can access the cameras web interface fine but any images >>>>>>>>>> are all >>>>>>>>>> the blank 1x1 frames. >>>>>>>>>> >>>>>>>>>> I have attached the system report hoping that this will shed some >>>>>>>>>> light on the issue. >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> >>>>>>>>>> Linden >>>>>>>>>> _______________________________________________ >>>>>>>>>> Support-list mailing list >>>>>>>>>> [email protected] >>>>>>>>>> >>>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Support-list mailing list >>>>>>>>> [email protected] >>>>>>>>> >>>>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Best regards, >>>>>>>> Oleg Dzhimiev >>>>>>>> Electronics Engineer >>>>>>>> phone: +1 801 783 5555 x124 >>>>>>>> Elphel, Inc. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Support-list mailing list >>>>>>> [email protected] >>>>>>> >>>>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Support-list mailing list >>>>> [email protected] >>>>> >>>>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>>>> >>>> >>> >>> _______________________________________________ >>> Support-list mailing list >>> [email protected] >>> >>> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >>> >>> >> >> >> -- >> Best regards, >> Oleg Dzhimiev >> Electronics Engineer >> phone: +1 801 783 5555 x124 >> Elphel, Inc. >> > > > _______________________________________________ > Support-list mailing list > [email protected] > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com > > -- Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
