Hello all,
The problems associated with small scale use of WVO and it's
inconsistant quality may be mitigated by a model I have been
considering.
I work for a Natural Foods company that handles a good deal of vegie
oils. I have all the equipment necessesary to filter and de-water WVO.

Our equipment utilization is on the order of 20%. We have some fairly
sophisticated equipment used in falvoring various oils with organic
herbs and spices. Lots of water, lots of solids.

Is there any demand for a regional, most likely co-op, WVO processing
facility? Assume we run at cost plus 10-15%, and could process
1500-2000  US gal per 8 hr shift. Is there sufiicent demand to run 1-2
days a week?
Is the "community" developed enough to deliver to the plant and
exchange  WVO for filtered, water free WVO?

Assume a major metro area, such as the San Francisco Bay Area. Is ther
the demand? Or, is the use of WVO by individuals, by it's very nature,
opposed to or unable to support this type of collection/distribution
system?

I would assume it would be an oil in/oil out less production loss type
of deal. I have drums, carboys, totes, pails etc. that could be used on
a deposit basis.

Just testing the "ahem" waters here. 

Thoughts?


Mark
 

 

--- Neoteric Biofuels Inc <[EMAIL PROTECTED]> wrote:
> Yes, and then run it through a water separator filter or two on its
> way 
> to the engine, if you want to do a more thorough job. Our G3 SVO Max 
> kit uses this approach
> 
> ...gravity settle only, followed by a trip through a heated filter
> with 
> two stage filtration and water separation.
> 
> Edward Beggs
> Neoteric Biofuels Inc.
> http://www.biofuels.ca
> 
> 
> 
> On Saturday, July 19, 2003, at 08:45 PM, Appal Energy wrote:
> 
> > Brent,
> >
> > 100*C is the boiling point for water. To get rid of water by the 
> > boiling
> > method not only do you have to expend massive amounts of energy,
> but 
> > the
> > water wil inevitably atomize and stay mixed with oil to some
> degree, 
> > even if
> > you boil the beejeebers out of it.
> >
> > Your best bet is to heat the oil to ~130*F (55*C) and let the water
> 
> > settle
> > out.
> >
> > No point in wasting time, energy or creating problems. Just be sure
> the
> > settling period is sufficient. The deeper the oil resevoir the
> longer 
> > the
> > settling time. (55 gallon drum, maybe 24-36 hours. 1,000 gallon
> tank, 
> > maybe
> > 48-72 hours.)
> >
> > Todd Swearingen
> >
> > ----- Original Message -----
> > From: "Brent" <[EMAIL PROTECTED]>
> > To: <biofuel@yahoogroups.com>
> > Sent: Friday, July 18, 2003 9:52 AM
> > Subject: [biofuel] dewatering WVO
> >
> >
> >> I read the information on dewatering the WVO, but when I was
> heating
> >> the oil I noticed that when it was taken off the heat and poured
> off,
> >> that there was water settled on the bottom. Can this be a way to
> >> dewater more quickly? Just heat the oil to 100 deg. C and then
> pour
> >> the oil off the top? Will water remain suspended in the oil?
> >>
> >> Brent
> >>
> >>
> >>
> >>
> >> Biofuel at Journey to Forever:
> >> http://journeytoforever.org/biofuel.html
> >>
> >> Biofuels list archives:
> >> http://archive.nnytech.net/
> >>
> >> Please do NOT send Unsubscribe messages to the list address.
> >> To unsubscribe, send an email to:
> >> [EMAIL PROTECTED]
> >>
> >> Your use of Yahoo! Groups is subject to 
> >> http://docs.yahoo.com/info/terms/
> >>
> >>
> >>
> >
> > /
> >
> >
> >
> 
> 
> 
> 
> 
> 
> 


__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Free shipping on all inkjet cartridge & refill kit orders to US & Canada. Low 
prices up to 80% off. We have your brand: HP, Epson, Lexmark & more.
http://www.c1tracking.com/l.asp?cid=5510
http://us.click.yahoo.com/GHXcIA/n.WGAA/ySSFAA/FGYolB/TM
---------------------------------------------------------------------~->

Biofuel at Journey to Forever:
http://journeytoforever.org/biofuel.html

Biofuels list archives:
http://archive.nnytech.net/

Please do NOT send Unsubscribe messages to the list address.
To unsubscribe, send an email to:
[EMAIL PROTECTED] 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


Reply via email to