I've had a few emails on what I meant by just needing the 18-22S. The series of connectors this on is from came out in WW2 to attempt to standardize on connectors. One feature is the outer shell and the inner insulated center are interchangeable.
This glossy gives a pretty good overview and how its done http://www.ittcannon.com/uploadedFiles/Product_PDFs/MS%20A&B%20Catalog.pdf -pete On Sat, Nov 24, 2012 at 7:40 PM, Pete Lancashire <[email protected]> wrote: > 18-22S is what I needed, now to go into the depths of the garaged and > find the box of MS connectors. > > -pete > > On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham <[email protected]> wrote: >> Pete, >> >> In the US, Galco sells a DDK product that works well. The connector and >> shell are a DMS3106A18-22S. >> >> http://www.galco.com/buy/DDK/DMS3106A18-22S >> >> You will also need a clamp and strain relief. I use a DMS3057-10A. >> >> http://www.galco.com/buy/DDK/DMS3057-10A >> >> It is the same connector as a 5065A though you have to be careful about the >> wiring. Some of the 5065A's are the same as the 5061A and others are >> different. >> >> Hope this helps. >> >> Joe >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Pete Lancashire >> Sent: Saturday, November 24, 2012 6:51 PM >> To: Discussion of precise time and frequency measurement >> Subject: [time-nuts] 5061A AC Power connector >> >> What is the MS type for the power plug for a 5061A ? >> >> I could not find it in the PDF I have. >> >> -pete >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
