Forgot to mention, when you get the DMS3106A18-22S, you'll have to unscrew the back, remove the connector insert, file out a small 'key' in the material, and rotate the insert to achieve the desired alignment to mate with the connector on the 5061A or the 5065A. The alignment is the same on both but the wiring might be different.
Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: Saturday, November 24, 2012 8:36 PM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] 5061A AC Power connector Pete, In the US, Galco sells a DDK product that works well. The connector and shell are a DMS3106A18-22S. http://www.galco.com/buy/DDK/DMS3106A18-22S You will also need a clamp and strain relief. I use a DMS3057-10A. http://www.galco.com/buy/DDK/DMS3057-10A It is the same connector as a 5065A though you have to be careful about the wiring. Some of the 5065A's are the same as the 5061A and others are different. Hope this helps. Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Pete Lancashire Sent: Saturday, November 24, 2012 6:51 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] 5061A AC Power connector What is the MS type for the power plug for a 5061A ? I could not find it in the PDF I have. -pete _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
