I hoped it helped also. I know it did for me. Will order 2 sets so I can finally have real connectors on the 5061 and 5065. I wonder if its the same for the standby power supply may need to order 3. Regards Paul WB8TSL
On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham <[email protected]> wrote: > Pete, > > In the US, Galco sells a DDK product that works well. The connector and > shell are a DMS3106A18-22S. > > http://www.galco.com/buy/DDK/DMS3106A18-22S > > You will also need a clamp and strain relief. I use a DMS3057-10A. > > http://www.galco.com/buy/DDK/DMS3057-10A > > It is the same connector as a 5065A though you have to be careful about the > wiring. Some of the 5065A's are the same as the 5061A and others are > different. > > Hope this helps. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Pete Lancashire > Sent: Saturday, November 24, 2012 6:51 PM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] 5061A AC Power connector > > What is the MS type for the power plug for a 5061A ? > > I could not find it in the PDF I have. > > -pete > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
