If you are going to be filing them, then you should wear a face mask - the base plating on those things (even now) is normally Cadmium. What you actually want is a MS3106A18-22SW, but it looks like that vendor only supplies connectors with the default polarization.
On Sun, Nov 25, 2012 at 10:48 AM, J. L. Trantham <[email protected]> wrote: > Forgot to mention, when you get the DMS3106A18-22S, you'll have to unscrew > the back, remove the connector insert, file out a small 'key' in the > material, and rotate the insert to achieve the desired alignment to mate > with the connector on the 5061A or the 5065A. The alignment is the same on > both but the wiring might be different. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of J. L. Trantham > Sent: Saturday, November 24, 2012 8:36 PM > To: 'Discussion of precise time and frequency measurement' > Subject: Re: [time-nuts] 5061A AC Power connector > > > Pete, > > In the US, Galco sells a DDK product that works well. The connector and > shell are a DMS3106A18-22S. > > http://www.galco.com/buy/DDK/DMS3106A18-22S > > You will also need a clamp and strain relief. I use a DMS3057-10A. > > http://www.galco.com/buy/DDK/DMS3057-10A > > It is the same connector as a 5065A though you have to be careful about the > wiring. Some of the 5065A's are the same as the 5061A and others are > different. > > Hope this helps. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Pete Lancashire > Sent: Saturday, November 24, 2012 6:51 PM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] 5061A AC Power connector > > What is the MS type for the power plug for a 5061A ? > > I could not find it in the PDF I have. > > -pete > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
