A few months ago Fabio Eboli posted some Python functions that might be useful. I haven't used or tested them myself, but they might be of interest. Still up on pastebin at
http://pastebin.com/download.php?i=VpZVuw0t I don't know if Fabio has done any further work on this but perhaps he'll chime in here. Paul On May 24, 2013, at 0:22, Chris Albertson <[email protected]> wrote: > You have been collecting programs? I did not know there were any to > collect. Do you have a list? I don't have much use for a .exe file but > is your are source codes available that would be great. > > > On Thu, May 23, 2013 at 4:44 PM, EB4APL <[email protected]> wrote: > >> Hello, >> >> Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been collecting >> control programs for it and keeping then in reserve. Now that I'm going to >> box it with a distribution amp I tried some of them, first of all to adjust >> the frequency against the GPS. I used Bob Campbel's VK4XV >> "Fe5680Calibrator.exe" with good results. I have other programs which >> interrogates the device and shows the hex dumps, but I would like to know >> if there is a windows program that allows to send other that the offset >> related commands to the device and get the responses not in hex but >> translated to plain language. In fact I don't know if there are >> housekeeping commands for reading thinks like the lock status or the lamp >> voltage like the analog outputs of the FRS-C and others. >> >> Thanks in advance, >> Ignacio EB4APL >> ______________________________**_________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/** >> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >> and follow the instructions there. > > > > -- > > Chris Albertson > Redondo Beach, California > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
