Hello, I'm still here,
unfortunately my Rb are gathering dust
and I cannot follow the list everyday.
I wrote some scripts to automate data
collection from FE5680 and my counter
using python. They run in Windows and
can be used and modified at will, I've
not much time now, so I cannot give support
on their usage, but it should be easy enough.
I will check what I have...
Il 2013-05-24 14:06 Ziggy9 ha scritto:
A few months ago Fabio Eboli posted some Python functions that might
be useful. I haven't used or tested them myself, but they might be of
interest. Still up on pastebin at
http://pastebin.com/download.php?i=VpZVuw0t
I don't know if Fabio has done any further work on this but perhaps
he'll chime in here.
Paul
On May 24, 2013, at 0:22, Chris Albertson <[email protected]>
wrote:
You have been collecting programs? I did not know there were any to
collect. Do you have a list? I don't have much use for a .exe file
but
is your are source codes available that would be great.
On Thu, May 23, 2013 at 4:44 PM, EB4APL <[email protected]>
wrote:
Hello,
Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been
collecting
control programs for it and keeping then in reserve. Now that I'm
going to
box it with a distribution amp I tried some of them, first of all to
adjust
the frequency against the GPS. I used Bob Campbel's VK4XV
"Fe5680Calibrator.exe" with good results. I have other programs
which
interrogates the device and shows the hex dumps, but I would like to
know
if there is a windows program that allows to send other that the
offset
related commands to the device and get the responses not in hex but
translated to plain language. In fact I don't know if there are
housekeeping commands for reading thinks like the lock status or the
lamp
voltage like the analog outputs of the FRS-C and others.
Thanks in advance,
Ignacio EB4APL
______________________________**_________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
and follow the instructions there.
--
Chris Albertson
Redondo Beach, California
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
