I added a command to display or change the frequency offset to my ZCOMM
program.
To use it:
port 1
fe [new offset]
On 05/24/2013 05:06 AM, Ziggy9 wrote:
A few months ago Fabio Eboli posted some Python functions that might be useful.
I haven't used or tested them myself, but they might be of interest. Still up
on pastebin at
http://pastebin.com/download.php?i=VpZVuw0t
I don't know if Fabio has done any further work on this but perhaps he'll chime
in here.
Paul
On May 24, 2013, at 0:22, Chris Albertson <[email protected]> wrote:
You have been collecting programs? I did not know there were any to
collect. Do you have a list? I don't have much use for a .exe file but
is your are source codes available that would be great.
On Thu, May 23, 2013 at 4:44 PM, EB4APL <[email protected]> wrote:
Hello,
Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been collecting
control programs for it and keeping then in reserve. Now that I'm going to
box it with a distribution amp I tried some of them, first of all to adjust
the frequency against the GPS. I used Bob Campbel's VK4XV
"Fe5680Calibrator.exe" with good results. I have other programs which
interrogates the device and shows the hex dumps, but I would like to know
if there is a windows program that allows to send other that the offset
related commands to the device and get the responses not in hex but
translated to plain language. In fact I don't know if there are
housekeeping commands for reading thinks like the lock status or the lamp
voltage like the analog outputs of the FRS-C and others.
Thanks in advance,
Ignacio EB4APL
______________________________**_________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
and follow the instructions there.
--
Chris Albertson
Redondo Beach, California
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
Chuck Forsberg WA7KGX [email protected] www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
