Here the last revision for the interface script:
http://pastebin.com/rVuDK3py
This is an example of data logging using the previous
functions:
http://pastebin.com/H9sMT1GP
I had somewhere also a script that put out
nice real time graphs from the logged data,
see matplotlib, numpy, etc...
Hope this helps.
I'm sorry I cannot keep working with Rb,
(busy looking for new job now, no luck
so far...) but if there are any questions
I will try to answer as far as I can :)
Ciao!
Il 2013-05-24 14:06 Ziggy9 ha scritto:
A few months ago Fabio Eboli posted some Python functions that might
be useful. I haven't used or tested them myself, but they might be of
interest. Still up on pastebin at
http://pastebin.com/download.php?i=VpZVuw0t
I don't know if Fabio has done any further work on this but perhaps
he'll chime in here.
Paul
On May 24, 2013, at 0:22, Chris Albertson <[email protected]>
wrote:
You have been collecting programs? I did not know there were any to
collect. Do you have a list? I don't have much use for a .exe file
but
is your are source codes available that would be great.
On Thu, May 23, 2013 at 4:44 PM, EB4APL <[email protected]>
wrote:
Hello,
Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been
collecting
control programs for it and keeping then in reserve. Now that I'm
going to
box it with a distribution amp I tried some of them, first of all to
adjust
the frequency against the GPS. I used Bob Campbel's VK4XV
"Fe5680Calibrator.exe" with good results. I have other programs
which
interrogates the device and shows the hex dumps, but I would like to
know
if there is a windows program that allows to send other that the
offset
related commands to the device and get the responses not in hex but
translated to plain language. In fact I don't know if there are
housekeeping commands for reading thinks like the lock status or the
lamp
voltage like the analog outputs of the FRS-C and others.
Thanks in advance,
Ignacio EB4APL
______________________________**_________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
and follow the instructions there.
--
Chris Albertson
Redondo Beach, California
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
