Thanks. I have some Motorola Oncore available.
Can you detail this "fairly simple manipulation of the signal lines"? Regards, Edésio On Thu, Aug 06, 2015 at 09:57:20PM -0400, Bob Camp wrote: > Hi > > People got a bit ???excited??? about the level of KS box discussions. All of > the work decoding > the 15 pin connector and how to drive the REF-0 was taken off list. > > Simple answer: > > Yes you can run a REF-0 by it???s self. It needs a dummy string that looks > like the output > of a Motorola Oncore to feed it and some fairly simple manipulation of the > signal lines. > It will then quite happily discipline to the pps you feed it. > > Bob > > > On Aug 6, 2015, at 7:27 PM, Edesio Costa e Silva <[email protected]> > > wrote: > > > > Hello Fellows! > > > > Had anyone managed to run the KS-24361 REF-0, the one without GPS, as a > > standalone unit? If so, can you provide some links on how to configure it? > > > > The reason to try this is cost. The REF-0 unit costs USD 25 + USD 52.30 > > (shipping to Brazil) and I have to pay the same amount as custom taxes. > > > > Right now the REF-0/REF-1 pair would be too expensive. > > > > Regards, > > > > Edésio > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
