Hi Bob I would also like to get the information on how to use the REF-0, I have one on the way
Thank you Gary vk2kyp -----Original Message----- From: time-nuts [mailto:[email protected]] On Behalf Of Bob Camp Sent: Friday, 7 August 2015 12:40 PM To: Edesio Costa e Silva Cc: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] KS-24361 REF-0 standalone Hi You need to get the Oncore running with the correct position locked in and spitting out the right strings. That’s all done by the CPU in the REF-1 unit. The REF-0 simply grabs the data off of the string as it comes by. I’ll see if I can dig out the information and send it to you off list. It’s buried around here somewhere. Bob > On Aug 6, 2015, at 10:02 PM, Edesio Costa e Silva <[email protected]> > wrote: > > Thanks. > > I have some Motorola Oncore available. > > Can you detail this "fairly simple manipulation of the signal lines"? > > Regards, > > Edésio > > On Thu, Aug 06, 2015 at 09:57:20PM -0400, Bob Camp wrote: >> Hi >> >> People got a bit ???excited??? about the level of KS box discussions. >> All of the work decoding the 15 pin connector and how to drive the REF-0 was >> taken off list. >> >> Simple answer: >> >> Yes you can run a REF-0 by it???s self. It needs a dummy string that >> looks like the output of a Motorola Oncore to feed it and some fairly simple >> manipulation of the signal lines. >> It will then quite happily discipline to the pps you feed it. >> >> Bob >> >>> On Aug 6, 2015, at 7:27 PM, Edesio Costa e Silva <[email protected]> >>> wrote: >>> >>> Hello Fellows! >>> >>> Had anyone managed to run the KS-24361 REF-0, the one without GPS, >>> as a standalone unit? If so, can you provide some links on how to configure >>> it? >>> >>> The reason to try this is cost. The REF-0 unit costs USD 25 + USD >>> 52.30 (shipping to Brazil) and I have to pay the same amount as custom >>> taxes. >>> >>> Right now the REF-0/REF-1 pair would be too expensive. >>> >>> Regards, >>> >>> Edésio >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
