Bob,
I would like that information too please and thank you.
I have a pair that is working quite well and I also have a second REF-0
that I want to start testing but just haven't got round to it yet to
figure out what is needed.
cheers, Graham ve3gtc
On 2015-08-07 02:39, Bob Camp wrote:
Hi
You need to get the Oncore running with the correct position locked in and
spitting out the right strings.
That’s all done by the CPU in the REF-1 unit. The REF-0 simply grabs the data
off of the string
as it comes by.
I’ll see if I can dig out the information and send it to you off list. It’s
buried around here somewhere.
Bob
On Aug 6, 2015, at 10:02 PM, Edesio Costa e Silva <[email protected]>
wrote:
Thanks.
I have some Motorola Oncore available.
Can you detail this "fairly simple manipulation of the signal lines"?
Regards,
Edésio
On Thu, Aug 06, 2015 at 09:57:20PM -0400, Bob Camp wrote:
Hi
People got a bit ???excited??? about the level of KS box discussions. All of
the work decoding
the 15 pin connector and how to drive the REF-0 was taken off list.
Simple answer:
Yes you can run a REF-0 by it???s self. It needs a dummy string that looks like
the output
of a Motorola Oncore to feed it and some fairly simple manipulation of the
signal lines.
It will then quite happily discipline to the pps you feed it.
Bob
On Aug 6, 2015, at 7:27 PM, Edesio Costa e Silva <[email protected]>
wrote:
Hello Fellows!
Had anyone managed to run the KS-24361 REF-0, the one without GPS, as a
standalone unit? If so, can you provide some links on how to configure it?
The reason to try this is cost. The REF-0 unit costs USD 25 + USD 52.30
(shipping to Brazil) and I have to pay the same amount as custom taxes.
Right now the REF-0/REF-1 pair would be too expensive.
Regards,
Edésio
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
