Hi

You need to get the Oncore running with the correct position locked in and 
spitting out the right strings. 
That’s all done by the CPU in the REF-1 unit. The REF-0 simply grabs the data 
off of the string
as it comes by. 

I’ll see if I can dig out the information and send it to you off list. It’s 
buried around here somewhere.

Bob

> On Aug 6, 2015, at 10:02 PM, Edesio Costa e Silva <[email protected]> 
> wrote:
> 
> Thanks.
> 
> I have some Motorola Oncore available.
> 
> Can you detail this "fairly simple manipulation of the signal lines"?
> 
> Regards,
> 
> Edésio
> 
> On Thu, Aug 06, 2015 at 09:57:20PM -0400, Bob Camp wrote:
>> Hi
>> 
>> People got a bit ???excited??? about the level of KS box discussions. All of 
>> the work decoding
>> the 15 pin connector and how to drive the REF-0 was taken off list.
>> 
>> Simple answer:
>> 
>> Yes you can run a REF-0 by it???s self. It needs a dummy string that looks 
>> like the output
>> of a Motorola Oncore to feed it and some fairly simple manipulation of the 
>> signal lines. 
>> It will then quite happily discipline to the pps you feed it.
>> 
>> Bob
>> 
>>> On Aug 6, 2015, at 7:27 PM, Edesio Costa e Silva <[email protected]> 
>>> wrote:
>>> 
>>> Hello Fellows!
>>> 
>>> Had anyone managed to run the KS-24361 REF-0, the one without GPS, as a
>>> standalone unit? If so, can you provide some links on how to configure it?
>>> 
>>> The reason to try this is cost. The REF-0 unit costs USD 25 + USD 52.30
>>> (shipping to Brazil) and I have to pay the same amount as custom taxes.
>>> 
>>> Right now the REF-0/REF-1 pair would be too expensive.
>>> 
>>> Regards,
>>> 
>>> Edésio
>>> _______________________________________________
>>> time-nuts mailing list -- [email protected]
>>> To unsubscribe, go to 
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> 

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to