soundcheck;540868 Wrote: > Hi John. > > The key question is how do you load the module? Udev? > > Would be nice if you tell me/us quickly how you've done it. ( No > in-depth explanation required). asound.conf is not an issue. > > Cheers
The driver is in the kernel and automatically gets activated when the USB DAC is attached. After plugging in the DAC you can ssh in and do aplay -l to find the device name. The alsa interface in squeezeplay sends to "default" so the simplest way to get data to the USB dac is to redefine default to be the USB DAC. Currently in the alsa config file there is a virtual card defined which clones its input to both the S/PDIF and DAC drivers. That virtual card is then set to default. You can add the USB DAC to the virtual card as well and then you have all three playing at the same time. One thing to look out for is that the device name and or card number is different depending whether the DAC is present at boot or hotplugged. So always do it the same way. That should be enough to get you started. John S. -- JohnSwenson ------------------------------------------------------------------------ JohnSwenson's Profile: http://forums.slimdevices.com/member.php?userid=5974 View this thread: http://forums.slimdevices.com/showthread.php?t=77927 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
