Mphillips;574457 Wrote: > Thanks, I know about the leaking battery but all seems to be working OK. > No error messages and the remote is fine (right now).To my knowledge > there isn't a DC offset on the pre-amp. I have tried all of the above > suggestions and nothing has changed. As far as distortion from the > right channel, it sounds clean. I can borrow a meter from work. It > sounds like I want to put the meter on the pre input and look for DC? > But if there is DC present, wouldn't that mess up all of my other > sources? Are there any similarities to the output stage of the touch > and the sb3?
No because the other sources may be immune to dc. The Touch and SB3 output stages are very different. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=81708 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
