Steve W;576439 Wrote: > Sorry if my questions sound a little confused, I'm trying to get my head > around what is what. > > I meant the diagnostics on the squeezebox touch. I can see that the SB > Touch is physically connected to the router (under the squeezebox Touch > diagnostics, the server software on the PC and under my router setup > page). However the squeezebox touch diagnostics say that it can not > connect to mysqueezebox.com and that those ports are not available. The > squeezebox server on the PC does show them as connected to the PC server > side though. > > I don't think they are being used by another application, they do not > appear under McAfee port list at all. > > BTW I am running windows 7 - apparently squeezebox server software > should set the ports during installation - it certainly shows them, so > the install looks fine. > > Thanks for everyone's help - it is appreciated.
So I assume you've done the usual: 1. Do a full reset of the touch (press and hold reset on back until you see it reset. 2. turn off modem, router, computer running SbS, unplugged TOUCH. Then restart in that order, letting everything fully start/boot before going to the next item. And have the ethernet plugged in to TOUCH when you plug in the power to the TOUCH. -- garym ------------------------------------------------------------------------ garym's Profile: http://forums.slimdevices.com/member.php?userid=17325 View this thread: http://forums.slimdevices.com/showthread.php?t=81970 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
