kidstypike wrote: > I have a Raspberry Pi 2 with an attached 2TB HDD, running max2play OS > and LMS, it just works. > > You would need: > > A Raspberry Pi 2 Model B and a suitable case & power supply > > Download and burn the max2play image to an 8GB micro SD card: > > Insert the SD card, a LAN cable and power up, all set-up is then done > through a web browser on your PC/mac > > Insall & configure LMS. > > There's a max2play thread on this forum if you need any help: > http://forums.slimdevices.com/showthread.php?101856-Max2Play-Webinterface-for-Mediaclients-%28Audioplayer-Squeezeserver-Airplay-XBMC%29
OK . Found out what you meant by 'unreliable'. I have sourced the parts you mentioned from Aussie suppliers too thanks. Seeing as the the SB will be sending instruction to the Pi do I need to do the EDO mod ? or am I just manipulating data coming from the Pi so I can leave the USB as a receiver only ? I notice NOOB and KODI programs do I need those or can I just buy the main bits as stated (it's cheaper without buying a kit full of things I don't need). When you say "install and configure LMS" where does that come from ? ....and do these NOOB or KODI programs need to be loaded at some stage.. Thanks. ------------------------------------------------------------------------ E.Man's Profile: http://forums.slimdevices.com/member.php?userid=65355 View this thread: http://forums.slimdevices.com/showthread.php?t=80516 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
