I'm not sure what the response, if any to "--xxx" messages is, as your post is not clear. Do you get responses to "--xxx" commands, or not? If not, then either the physical layer link is broken between the T2 and the nuvi, the T2 is not receiving or responding to commands, or the Nuvi is not sending commands or receiving responses. Clear all or some of the waypoints out of the Nuvi (pick local digis or things you know will get updated and see if they come back. That will establish whether the physical link is working or not. If you are getting responses to "--xxx" commands, or if the waypoints are getting restored, then either the Nuvi is not sending commands or receiving responses or the T2 is not receiving the commands or sending responses. Make sure the port you are using on the T2 is still set to "Garmin". To do this you may have to put a PC on the other port. Since the cable is made for port 1 and the default for Port 2 is "Flow" if you didn't change port 2 to "Auto" you may not be able to communicate with the T2 using a PC without resetting the T2 to defaults. I haven't had mine long enough to know how to tell you to do that. It may still come down to putting another RS-232 terminal on the line to the Nuvi from the T2 to verify that it is sending the messages in proper format. Good luck, Al K5TAN
--- On Tue, 10/6/09, tbanks204 <[email protected]> wrote: From: tbanks204 <[email protected]> Subject: [tracker2] T2-135 and Garmin Nuvi 350 To: [email protected] Date: Tuesday, October 6, 2009, 9:32 PM My Nuvi appears to have developed a problem receving messages, it was working ok, but now when I send a test message to it, nothing is received, and when I use the --Version test, it will only receive it when I reboot the Nuvi, it appears to be showing other stations on the map, I have sent some test messages to KC0WNY-15, it does not receive them , any thoughts on what the matter is? ------------------------------------ Yahoo! Groups Links
