Thanks, but no data stored on the Nuvi, Just the Maps
----- Original Message -----
From: Rudy
To: [email protected]
Sent: Wednesday, October 07, 2009 6:55 PM
Subject: [tracker2] Re: T2-135 and Garmin Nuvi 350
Just a shot in the dark, do you have a lot of data stored in the Nuvi,
ie, is it out of memory?
--- In [email protected], "Teddy Banks" <tbanks...@...> wrote:
>
> Checked my settings, appear to be ok, Nuvi in not responding to anything
> sent to it now, was thinking might be a defective cable, since I don't
have
> another, I can't check it, and it appears that Scott is sold out.
> ----- Original Message -----
> From: Al Waschka
> To: [email protected]
> Sent: Tuesday, October 06, 2009 9:21 PM
> Subject: Re: [tracker2] T2-135 and Garmin Nuvi 350
>
>
> I'm not sure what the response, if any to "--xxx" messages is, as your
> post is not clear. Do you get responses to "--xxx" commands, or not?
>
> If not, then either the physical layer link is broken between the T2
> and the nuvi, the T2 is not receiving or responding to commands, or the
Nuvi
> is not sending commands or receiving responses. Clear all or some of the
> waypoints out of the Nuvi (pick local digis or things you know will get
> updated and see if they come back. That will establish whether the
physical
> link is working or not.
>
> If you are getting responses to "--xxx" commands, or if the
> waypoints are getting restored, then either the Nuvi is not sending
commands
> or receiving responses or the T2 is not receiving the commands or
sending
> responses..
>
> Make sure the port you are using on the T2 is still set to "Garmin".
> To do this you may have to put a PC on the other port. Since the cable
is
> made for port 1 and the default for Port 2 is "Flow" if you didn't
change
> port 2 to "Auto" you may not be able to communicate with the T2 using a
PC
> without resetting the T2 to defaults. I haven't had mine long enough to
> know how to tell you to do that.
>
> It may still come down to putting another RS-232 terminal on the
> line to the Nuvi from the T2 to verify that it is sending the messages
in
> proper format.
>
> Good luck,
>
> Al K5TAN
>
> --- On Tue, 10/6/09, tbanks204 <tbanks...@...> wrote:
>
>
> From: tbanks204 <tbanks...@...>
> Subject: [tracker2] T2-135 and Garmin Nuvi 350
> To: [email protected]
> Date: Tuesday, October 6, 2009, 9:32 PM
>
>
> My Nuvi appears to have developed a problem receving messages, it
> was working ok, but now when I send a test message to it, nothing is
> received, and when I use the --Version test, it will only receive it
when I
> reboot the Nuvi, it appears to be showing other stations on the map, I
have
> sent some test messages to KC0WNY-15, it does not receive them , any
> thoughts on what the matter is?
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
