Got the problem resolved I think, ordered another nuvi 350 though, going to
need a cable for a Kenwood TM-710A though. Thanks
----- Original Message -----
From: Scott Miller
To: [email protected]
Sent: Monday, October 12, 2009 2:42 PM
Subject: Re: [tracker2] T2-135 and Garmin Nuvi 350
I'm not sold out of the 010-10813-00's if that's what you're talking
about. Inventory count might be out of date, but I think I fixed it a
day or two ago.
Scott
Teddy Banks wrote:
>
>
> Checked my settings, appear to be ok, Nuvi in not responding to anything
> sent to it now, was thinking might be a defective cable, since I don't
> have another, I can't check it, and it appears that Scott is sold out.
>
> ----- Original Message -----
> *From:* Al Waschka <mailto:[email protected]>
> *To:* [email protected] <mailto:[email protected]>
> *Sent:* Tuesday, October 06, 2009 9:21 PM
> *Subject:* Re: [tracker2] T2-135 and Garmin Nuvi 350
>
>
>
> I'm not sure what the response, if any to "--xxx" messages is, as
> your post is not clear. Do you get responses to "--xxx" commands,
> or not?
>
> If not, then either the physical layer link is broken between the T2
> and the nuvi, the T2 is not receiving or responding to commands, or
> the Nuvi is not sending commands or receiving responses. Clear all
> or some of the waypoints out of the Nuvi (pick local digis or things
> you know will get updated and see if they come back. That will
> establish whether the physical link is working or not.
>
> If you are getting responses to "--xxx" commands, or if the
> waypoints are getting restored, then either the Nuvi is not sending
> commands or receiving responses or the T2 is not receiving the
> commands or sending responses..
>
> Make sure the port you are using on the T2 is still set to
> "Garmin". To do this you may have to put a PC on the other port.
> Since the cable is made for port 1 and the default for Port 2 is
> "Flow" if you didn't change port 2 to "Auto" you may not be able to
> communicate with the T2 using a PC without resetting the T2 to
> defaults. I haven't had mine long enough to know how to tell you to
> do that.
>
> It may still come down to putting another RS-232 terminal on the
> line to the Nuvi from the T2 to verify that it is sending the
> messages in proper format.
>
> Good luck,
>
> Al K5TAN
>
> --- On *Tue, 10/6/09, tbanks204 /<[email protected]>/* wrote:
>
>
> From: tbanks204 <[email protected]>
> Subject: [tracker2] T2-135 and Garmin Nuvi 350
> To: [email protected]
> Date: Tuesday, October 6, 2009, 9:32 PM
>
> My Nuvi appears to have developed a problem receving messages,
> it was working ok, but now when I send a test message to it,
> nothing is received, and when I use the --Version test, it will
> only receive it when I reboot the Nuvi, it appears to be showing
> other stations on the map, I have sent some test messages to
> KC0WNY-15, it does not receive them , any thoughts on what the
> matter is?
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
> (Yahoo! ID required)
>
>
> mailto:[email protected]
>
<http://us.mc1806.mail.yahoo.com/mc/[email protected]>
>
>
>
>
