Just a shot in the dark, do you have a lot of data stored in the Nuvi, ie, is it out of memory?
--- In [email protected], "Teddy Banks" <tbanks...@...> wrote: > > Checked my settings, appear to be ok, Nuvi in not responding to anything > sent to it now, was thinking might be a defective cable, since I don't have > another, I can't check it, and it appears that Scott is sold out. > ----- Original Message ----- > From: Al Waschka > To: [email protected] > Sent: Tuesday, October 06, 2009 9:21 PM > Subject: Re: [tracker2] T2-135 and Garmin Nuvi 350 > > > I'm not sure what the response, if any to "--xxx" messages is, as your > post is not clear. Do you get responses to "--xxx" commands, or not? > > If not, then either the physical layer link is broken between the T2 > and the nuvi, the T2 is not receiving or responding to commands, or the Nuvi > is not sending commands or receiving responses. Clear all or some of the > waypoints out of the Nuvi (pick local digis or things you know will get > updated and see if they come back. That will establish whether the physical > link is working or not. > > If you are getting responses to "--xxx" commands, or if the > waypoints are getting restored, then either the Nuvi is not sending commands > or receiving responses or the T2 is not receiving the commands or sending > responses.. > > Make sure the port you are using on the T2 is still set to "Garmin". > To do this you may have to put a PC on the other port. Since the cable is > made for port 1 and the default for Port 2 is "Flow" if you didn't change > port 2 to "Auto" you may not be able to communicate with the T2 using a PC > without resetting the T2 to defaults. I haven't had mine long enough to > know how to tell you to do that. > > It may still come down to putting another RS-232 terminal on the > line to the Nuvi from the T2 to verify that it is sending the messages in > proper format. > > Good luck, > > Al K5TAN > > --- On Tue, 10/6/09, tbanks204 <tbanks...@...> wrote: > > > From: tbanks204 <tbanks...@...> > Subject: [tracker2] T2-135 and Garmin Nuvi 350 > To: [email protected] > Date: Tuesday, October 6, 2009, 9:32 PM > > > My Nuvi appears to have developed a problem receving messages, it > was working ok, but now when I send a test message to it, nothing is > received, and when I use the --Version test, it will only receive it when I > reboot the Nuvi, it appears to be showing other stations on the map, I have > sent some test messages to KC0WNY-15, it does not receive them , any > thoughts on what the matter is? > > > > ------------------------------------ > > Yahoo! Groups Links >
