I'm not sold out of the 010-10813-00's if that's what you're talking 
about.  Inventory count might be out of date, but I think I fixed it a 
day or two ago.

Scott

Teddy Banks wrote:
>  
> 
> Checked my settings, appear to be ok, Nuvi in not responding to anything 
> sent to it now, was thinking might be a defective cable, since I don't 
> have another, I can't check it, and it appears that Scott is sold out.
> 
>     ----- Original Message -----
>     *From:* Al Waschka <mailto:[email protected]>
>     *To:* [email protected] <mailto:[email protected]>
>     *Sent:* Tuesday, October 06, 2009 9:21 PM
>     *Subject:* Re: [tracker2] T2-135 and Garmin Nuvi 350
> 
>      
> 
>     I'm not sure what the response, if any to  "--xxx" messages is, as
>     your post is not clear.  Do you get responses to "--xxx" commands,
>     or not?
>      
>     If not, then either the physical layer link is broken between the T2
>     and the nuvi, the T2 is not receiving or responding to commands, or
>     the Nuvi is not sending commands or receiving responses.  Clear all
>     or some of the waypoints out of the Nuvi (pick local digis or things
>     you know will get updated and see if they come back.  That will
>     establish whether the physical link is working or not.
>      
>     If you are getting responses to "--xxx" commands, or if the
>     waypoints are getting restored, then either the Nuvi is not sending
>     commands or receiving responses or the T2 is not receiving the
>     commands or sending responses..
>      
>     Make sure the port you are using on the T2 is still set to
>     "Garmin".  To do this you may have to put a PC on the other port. 
>     Since the cable is made for port 1 and the default for Port 2 is
>     "Flow" if you didn't change port 2 to "Auto" you may not be able to
>     communicate with the T2 using a PC without resetting the T2 to
>     defaults.  I haven't had mine long enough to know how to tell you to
>     do that.
>      
>     It may still come down to putting another RS-232 terminal on the
>     line to the Nuvi from the T2 to verify that it is sending the
>     messages in proper format.
>      
>     Good luck,
>      
>     Al K5TAN
> 
>     --- On *Tue, 10/6/09, tbanks204 /<[email protected]>/* wrote:
> 
> 
>         From: tbanks204 <[email protected]>
>         Subject: [tracker2] T2-135 and Garmin Nuvi 350
>         To: [email protected]
>         Date: Tuesday, October 6, 2009, 9:32 PM
> 
>         My Nuvi appears to have developed a problem receving messages,
>         it was working ok, but now when I send a test message to it,
>         nothing is received, and when I use the --Version test, it will
>         only receive it when I reboot the Nuvi, it appears to be showing
>         other stations on the map, I have sent some test messages to
>         KC0WNY-15, it does not receive them , any thoughts on what the
>         matter is?
> 
> 
> 
>         ------------------------------------
> 
>         Yahoo! Groups Links
> 
> 
>             (Yahoo! ID required)
> 
> 
>             mailto:[email protected]
>         
> <http://us.mc1806.mail.yahoo.com/mc/[email protected]>
> 
> 
> 
> 

Reply via email to