On Mon, Oct 19, 2009 at 4:20 PM, Pete Lilja <[email protected]> wrote: > I received my T2-135 board today and have it installed in my Alinco DR-135. > When I connect the Argent serial cable from the radio to the side port of the > Nuvi (power is through the cradle) and turn both on I do not see any > "Dispatch" button or other indication the two are talking.
When I first installed my T2-135 board in my DR-135 I had a devil of a time getting it to do *anything* (couldn't connect with otwincfg, etc). I tried everything I could think of related to troubleshooting physical cabling, PC serial ports, etc, and finally the solution was to do a factory reset on the DR-135. After that it has been working flawlessly. Not sure if this reset issue is common or just something specific to my radio. If Scott has already programmed the T2-135 for you, perhaps all you need to do is a factory reset on your Alinco? The procedure to do a reset is to hold down the FUNC button while powering the radio on. Note that this will ERASE any settings and memories from the DR-135. That's how I got mine working anyway, hope that helps. Kevin KB9MQU
