channel 37 does not have a (DFS) next to it in the list
On 07/26/2017 11:55 AM, Josh Luthman wrote:
DFS channels it will have to vacate, yes.
I suggest setting multiple frequencies on the AP so it cycles through
them.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 26, 2017 at 2:53 PM, Jan Van Kort
<[email protected] <mailto:[email protected]>> wrote:
two issues: I've got some m5 gear that seem able to change channels
after install on their own. I've found a couple that were in auto
mode
(never allowed here) and a few more that were in not normal channel
selections. Does this happen as a result of firmware updates?
I've noticed on the newer radios they have a wider range of channel
selections, but this seems weird as another new one out of same parts
order pile won't have the same range. I'll set the access point for
channel 37 and go over to the receive station and it won't see it.
Cannot connect them, the station will only go to 147.
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
