Are you saying the station's frequency is only doing the upper channels? Depending on which m5 radio it is, you might not have access to 5.1 or 5.4 (pre/post an FCC key...)
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 3:06 PM, Jan Van Kort <[email protected]> wrote: > channel 37 does not have a (DFS) next to it in the list > > On 07/26/2017 11:55 AM, Josh Luthman wrote: > > DFS channels it will have to vacate, yes. > > I suggest setting multiple frequencies on the AP so it cycles through them. > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Jul 26, 2017 at 2:53 PM, Jan Van Kort <[email protected]> > wrote: > >> two issues: I've got some m5 gear that seem able to change channels >> after install on their own. I've found a couple that were in auto mode >> (never allowed here) and a few more that were in not normal channel >> selections. Does this happen as a result of firmware updates? >> >> I've noticed on the newer radios they have a wider range of channel >> selections, but this seems weird as another new one out of same parts >> order pile won't have the same range. I'll set the access point for >> channel 37 and go over to the receive station and it won't see it. >> Cannot connect them, the station will only go to 147. >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > > _______________________________________________ > Ubnt_users mailing > [email protected]http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
