A STA by default will scan all frequencies if that's what you're asking. All frequencies available to it.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 5:11 PM, Tyson <[email protected]> wrote: > i answered to quick earlier. i hadn't read back far enough to understand > your problem. I'm actually still confused some what your problem is. A ss > of your wireless tab of a radio that your talking about would help. So > your saying that on a power beam m5 it's set to an auto channel or a > channel in the wrong range you normally use after a firmware update to > 6.04. Is that right? That doesn't make a lot of sense unless the pbe m5 is > the AP as the AP dictates the channel. that's where I'm confused the most. > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: Jan Van Kort <[email protected]> > Date: 7/26/17 3:36 PM (GMT-06:00) > To: [email protected] > Subject: Re: [Ubnt_users] changing channels on me? > > using pbe-m5-400, 6.04 at present, most of the m5 gear are pbe. Am > wondering if the update to 6.04 put any of them into auto channel mode? > > On 07/26/2017 12:58 PM, Tyson wrote: > > pretty sure Josh is right on. on the stations that don't have the > channels that the newer ones have update the firmware. can't remember what > version is the oldest that accepts it, but 5.6.2 kind of rings a bell. we > have 6.0.4 and I know that works. to add more channels need to activate > UNII rules under the system tab on all our m5 gear so that doesn't happen. > Nanostation m5s throw me off the most since they do some eds channels but > not all so it's easier to get lucky and work out of the box and forget on > them. > > > > Sent from my Verizon, Samsung Galaxy smartphone > > -------- Original message -------- > From: Josh Luthman <[email protected]> > <[email protected]> > Date: 7/26/17 3:08 PM (GMT-05:00) > To: Ubiquiti Users Group <[email protected]> <[email protected]> > Subject: Re: [Ubnt_users] changing channels on me? > > Are you saying the station's frequency is only doing the upper channels? > Depending on which m5 radio it is, you might not have access to 5.1 or 5.4 > (pre/post an FCC key...) > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Jul 26, 2017 at 3:06 PM, Jan Van Kort <[email protected]> > wrote: > >> channel 37 does not have a (DFS) next to it in the list >> >> On 07/26/2017 11:55 AM, Josh Luthman wrote: >> >> DFS channels it will have to vacate, yes. >> >> I suggest setting multiple frequencies on the AP so it cycles through >> them. >> >> >> Josh Luthman >> Office: 937-552-2340 <%28937%29%20552-2340> >> Direct: 937-552-2343 <%28937%29%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Wed, Jul 26, 2017 at 2:53 PM, Jan Van Kort <[email protected] >> > wrote: >> >>> two issues: I've got some m5 gear that seem able to change channels >>> after install on their own. I've found a couple that were in auto mode >>> (never allowed here) and a few more that were in not normal channel >>> selections. Does this happen as a result of firmware updates? >>> >>> I've noticed on the newer radios they have a wider range of channel >>> selections, but this seems weird as another new one out of same parts >>> order pile won't have the same range. I'll set the access point for >>> channel 37 and go over to the receive station and it won't see it. >>> Cannot connect them, the station will only go to 147. >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >> >> >> >> _______________________________________________ >> Ubnt_users mailing >> [email protected]http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > > _______________________________________________ > Ubnt_users mailing > [email protected]http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
